Search results

you can have a little negative camber, that is good for handling. i see you have 1.5 negative but you are positve on the other side. they need to be the same and err more to the negative side. they will need to elongate the slots for the upper arm bolts, usually 1/8" so the a-arm can be pulled...

dave that is great. i am stoked to hear of the number of guys roadracing with our kits. maybe we could start a whole new series?:idea: LOL!~ dude i am stoked for you that is great news. can you send me some pics for my site if you get time?

there is one thing no one gave Tony credit for!!!!! he did this with a 6 speed!!!!!!!!!!! dude that is AWESOME! to do that with a 6speed in a 5000lb truck making that kind of power is killer. with some traction, and holding your tongue right 10's easy. with a turbo 400 and a transbrake-9's all...

put a hose clamp on the bottom fitting on the throttle body-those lines go to the vaccum solenod that vents the gas tank etc, and you could suck air right there. make sure that per the instructions the blade has been centered on all four sides-at the same time.-we also had an incident like this...

al is this on a Viper car? is it an aftermarket cruise control? it sounds like a cruise issue, becuase the idle and throttle response is good. a TB is such a simple device (mechanically speaking) that it wouldnt have an effect on the cruise. make sure you dont have a vaccum leak on the cruise...

muhuhuhhahahahahhahaa

1500 parts for rockers and pushrods. 890 for billet valve covers needed for the clearance. or we can do a combo package for 2200 for the entire setup.

you will always get valve train noise from the Viper engine-of ANY generation. the ONLY way it will go away is to install a set of roller rockers and chromoly pushrods. the factory rockers are just stamped steel, and their clearances are all over the place, and the warmer they get,the more...

thats only for sissys, no pain no gain!:D

Kevin Rodney Roy Bone FlyingLow Outnumbered JMB Dominick572 SilvrSRT10 Nycsteve BlueSRT10 amoparman mopower1958 & wife Shellie Speed Racer & wife Trixie, 1 truck - The Mach 5 (Perry) Trooper & Wife, 1 truck Chris (21 CTSRT) NBT Doneo streetwedg BLACK1 Nowwhat Joemags54...

GREAT NEWS! glad you are getting this back on the road again. she'll be better-n-ever now:D

muhuhahhahahahahaha:D

is it possible to infuse the skin on your forehead down to the bone?:( :confused: i sunburned my freaking forehead so bad that it feels like 40 grit sandpaper and it makes noises like i am crunching pringles when i blink my eyes. is this a bad thing?:dontknow: :D :p man, its a good...

put your fingers on the injector plugs. you should feel a definite hard clicking from the injector being fired. see if #7 has the same hard click as the other cylinders. check the other bank (pass side) and see if any others are doing it. there are 5 drivers in the ecm that control these. if...

you betta keep that truck Ron, or i will come ova tha with the boys, to give ya's a tune up, ya see?!;) :D

yes, crank em on.

dude, do it right, and pull the intake, and replace them ALL. dont skimp on the details. all 10 wires have been on there and firing the same amount of times, same engine heat, etc. do it right, and be done with her. you will be glad you did. i have 1 set of black 1200 wires here i can send you...

yes, in fact. i have fans in stock and ready to go, just give me a call. 812-477-1740 812-453-4862

congrats!!!!!!!!! best power per dollar, and lasts a lifetime:rock:

fred, follow the install instructions its a snap. call me and i can walk you thru it.