Search results

  1. S

    Need a hand to fix my Truck, interested?

    I believe it was, the timing sensor gives me a reading inline with the numbers I go from Sean. I am going to write a letter of intent.
  2. S

    Need a hand to fix my Truck, interested?

    I agree that I have to log. I need to buy the software from Sean.
  3. S

    Need a hand to fix my Truck, interested?

    Thanks for the huge outpour of support, everyone. This makes me rather happy to have a pretty tight knit group like this. I will do as much as I can while the snow is still here. I have been getting frustrated and it makes me feel a lot better to know you people are willing to help when you can...
  4. S

    Need a hand to fix my Truck, interested?

    problem strikes when i do a normal take-off from still, hard accel from still, when I do a show-off rev and if I do a hard accel from rolling.
  5. S

    Need a hand to fix my Truck, interested?

    Yes, from SPI tuning in Oakville. I do not trust it. They have been telling me for 2 years that my truck was fixed...does she seem fixed to you? So I want to get a new one from Sean.
  6. S

    Need a hand to fix my Truck, interested?

    My current theory is the Boost control actuator at the rear of the compressor. The stock cam would have stock vacuum figures, but I have since put in a Com Coupe Cam which ideas rather low and with a low idle vacuum... there is a possiblity that the actuator is open when she needs to be closed...
  7. S

    Need a hand to fix my Truck, interested?

    Hey everybody, I am having the worst time trying to fix my Ram. When I got her from Brad (Dodge Ram SRT-10 Forum - Viper Truck Club of America - View Profile: LoveThisTruck) she ran great. I even went down to San Antonio to test drive her. I had her for about a month and then started having...
  8. S

    Hey Brad, Still having issues with this truck. just wanted to ask u a couple questions: how...

    Hey Brad, Still having issues with this truck. just wanted to ask u a couple questions: how much boost did u normally have? what were some typical wideband readings? (under load/idle/de-cell) Thanks.
  9. S

    HELP! Wideband is reading lean at idle!!!

    also I read a thread somewhere (of course I cant find it again...) that when this guy put a lumpy cam in his supercharged viper his bypass valve was fluttering due to reduced engine vacuum. Anybody ever have one that just wouldn't close properly? Also does anyone know anything about the...
  10. S

    HELP! Wideband is reading lean at idle!!!

    i read somewhere that the wideband should be 1 foot from engine if un-boosted and 2 feet from engine if boosted. true or false? also the plugs did look black and sooty, (rich) during compression test. Yes the cam was aparently added to the tune. but the retards at SPI wrote over the ROE...
  11. S

    HELP! Wideband is reading lean at idle!!!

    Ok, so here's the update (had a friend look at it with us): We started it last night, let it get to temp. First thing we noticed is it looks like my vacuum/boost gauge is wrong. i'm not getting 4" of vacuum like previously thought. I'm actually getting 12" (at idle). We were able to...
  12. S

    HELP! Wideband is reading lean at idle!!!

    the stock pcm controls the engine at idle. the vec "should" only be affecting trim when it sees boost right? this all seems to have started when I had the camshaft installed. I'm starting to think that the cam isnt' fazed correctly with the crank and the pcm is trying to compensate. just a...
  13. S

    HELP! Wideband is reading lean at idle!!!

    Just did a compression test on all cylinders they are all close to 150psi. Will try to post a video of it running soon.
  14. S

    HELP! Wideband is reading lean at idle!!!

    its an AEM wideband and a VEC3 controlling fuel *fyi: I bought this truck with everything it has except the competition coupe cam. I had to get the cylinder heads re-done because I had installed e3 spark plugs and the cages blew apart and stretched some valves.... SPI in Oakville Ontario redid...
  15. S

    HELP! Wideband is reading lean at idle!!!

    The o2 sensors are all new (all 4). I'm going to do a compression & leakdown test. I'll let you know what I find. I've checked all the PCM inputs and they seem to check out (TPS, MAP, o2's, CT & IAT). If my numbers are good on the compression test (fingers crossed) I'd be thinking computer...
  16. S

    HELP! Wideband is reading lean at idle!!!

    I've got a 2004 R/C SRT10 Ram with a ROE camshaft and the Lysholm 3.3L/ROE supercharger ontop. at idle my wideband is reading 17+ and my intake pressure is around 4".... As far as I can tell I don't have an intake leak. I've checked the resistance on all my injectors (16.6-16.8). My fuel...
  17. S

    MY Ram is Misfiring

    all i know is no one should ever use E3 spark plugs (in my opinion and experience) in an expensive/high performance/boosted engine...EVER. All but one of my plugs grenaded.
  18. S

    Media Centre Success Stories

    i would love this!!! Tesla Model S to have 17-inch infotainment console powered by Tegra; BMW using NVIDIA tech too -- Engadget
  19. S

    Media Centre Success Stories

    CFB Petawawa
  20. S

    Media Centre Success Stories

    Hey Everybody, not trying to repost. Just would like as many Audio Head unit success stories as I can get. I am trying to find what is right for me to put into my Alice. Links are fine, links to instructions are better. I would really like an Android based Media centre, hopefully with GPS and...
Back
Top