Search results

  1. C

    Low Oil Pressure

    I put the mechanical gauge on today and got the following: At 180 oil temp, it was 20 psi and at 3000 rpm it was 60 psi. So if the OEM manual is correct than its with in spec. A little on the low side for me, I would like to see 35+. Not sure what to do?
  2. C

    Low Oil Pressure

    I wish.....I already have one truck build going on. I don't need two that's for sure. But I wouldn't mind a good strong NA motor build.
  3. C

    Low Oil Pressure

    I was thinking the same, so I took the filter off and check. I'm thinking this as well, but wanted some feed back before I put a fork in her. I have ran m1 filter since I have owned the truck, which has been 3 years now. Also the motor sounds good, no strange noises.
  4. C

    Low Oil Pressure

    I'm thinking this isn't good at all, but just wanted some feedback Changed the oil in the truck the other day and drove her to town in stop and go traffic. Then noticed that the oil pressure is low 15psi when at operating temp of 180 plus, it was more like 200 in the traffic. When moving the...
  5. C

    Lightly used Volant CAI

    Are those scratches on the face of the air box cover, or is the picture just messed up. Is there any way you can take a better pic. Very Interested, just want to verify there are no scratches. Thanks
  6. C

    Need Help P0031 Code

    I looked over the wires and didn't see anything at all. I do have the long tubes headers with a extension wire. I pulled the extension wire out and looked it over also, but didn't see anything wrong with it. I ordered a new extension wire thinking it might be something within the wire I cant...
  7. C

    Need Help P0031 Code

    I had this code come up about a week ago. (P0031 which is a O2 sensor) I did some digging around and found this is for the left bank upstream O2 sensor, so I made a trip to the parts store and picked up an O2 sensor. When I got to the parts store they only had a Denso O2 sensor priced for...
  8. C

    QC drop springs

    PM sent
  9. C

    New Viper Hitch Cover

    I made it here at work. It is 5.37" x 4.6" used 1/4" thick alum.
  10. C

    New Viper Hitch Cover

    Thanks......yes that is the new 2013 logo and the one I had before was the gen 2 logo.
  11. C

    New Viper Hitch Cover

    My new hitch cover. Since someone else thought my last one really belonged to them. I now have this one locked.
  12. C

    The need for a better CAI

    Why not ceramic coat the intake tube like you would do headers?
  13. C

    The need for a better CAI

    Wonder how plastic holds up to heat. I ask because here at work we have a thermoform machine. So I could make the intake tubes from plastic instead of metal. Ask for the metal, I could use nut plates mounted to the bottom of the tubing and then mount a half round shield to keep the intake...
  14. C

    The need for a better CAI

    Well this is what I have been working on for the past couple of months. I haven’t done much with it for awhile. I was to the point of getting some real dimensions and finalizing some numbers. I was also going to look in too the best place to run the outside air inlet. I was thinking of running...
  15. C

    Oh my dear god

    That is so very true.
  16. C

    calling ALL georgia srt10 guys

    No I don't. My wife ran in to a guy on ports with a RC that works out there. I seen a Red QC down town one night. But I have never talked to anyone. Would like to see more people in the area, to maybe start a once a month meet or something. I also know a guy with a lighting that might would like...
  17. C

    calling ALL georgia srt10 guys

    I'm in the Sav
  18. C

    ATTN!!!!! Lots of Parts for sale Stripped truck!!!!!!!!!!

    Whats the drop on the x-metal springs and will they work for QC truck?
  19. C

    ATTN!!!!! Lots of Parts for sale Stripped truck!!!!!!!!!!

    PM sent
  20. C

    ATTN!!!!! Lots of Parts for sale Stripped truck!!!!!!!!!!

    Is the pioneer radio or the radio bezel sold yet?
Back
Top