Search results

  1. T

    Radar detectors, Laser detector and Jammers - Input anyone?

    Unless the new passports have rear facing radar and arrows showing you where the signal is coming from I wouldn't bother. I can't even imagine what good a radar detector is if you don't know where the signal is coming from. Also I get shot from behind on and off exit ramps all of the time and...
  2. T

    Looking to buy a Valentine 1

    Get the V-1. The directional arrows are invaluable so is the backwards facing radar.
  3. T

    suspension problems

    If the ball joint was bad I can't imagine that the alignment shop wouldn't have seen it. It does sound like a brake issue otherwise all these alignment shops are incompetent which I find hard to believe.
  4. T

    Need help with crank bolt

    I have an 04 and I checked my bolt the other day. It is the larger 1 1/4 bolt. Isn't it supposed to be a 15/16th bolt like the one in the picture. Or is that an 1 1/4? It doesn't look that big to me but I am not the best at judging bolt sizes either.
  5. T

    what wrench for stock oil cooler lines?

    I am assuming you meant 1 1/4 right?
  6. T

    what wrench for stock oil cooler lines?

    Does any one know what size the fittings are on the factory oil Cooler lines?
  7. T

    MY SRT'S FIRST ENCOUNTER WITH THE 09 LIGHTNING

    My friend designs and tunes the suspensions for the f 150 at ford. There is no lightning and the SVT group was disbanded 2 or 3 years ago.
  8. T

    04 updated to 1 1/4 crank bolt?

    I have been lazy and have just gotten around to checking the tightness of my crank bolt. From what I have read my bolt was supposed to be the smaller 13/16's bolt. It has already been changed to an 1 1/4 bolt which was supposed to be used on the 05 and 06's. Did dodge have a recall because I...
  9. T

    Can't Pump Gas into my 10!! Help!

    Look at your vent tube. It comes of the right side Of the fill tube if your looking at it from outside the truck. Try disconnecting it from the fill tube first. You just push the white tab in on the fitting and pull it off. If that doesn't work try disconnecting it from the gas tank itself. The...
  10. T

    Looking for RB1 or RB4

    the ten pin connector appeared to be on the back of the Rb1 for the cd changer in the picture I saw and that is all you need to hook up the mopar adapter kit. The RB4 also has it but the port doesn't officially support the adapter. It turns out though that the rb4 plays the ipod it just doesn't...
  11. T

    Looking for RB1 or RB4

    Huh everything I read from other people said it worked with RB1 and Dodge themselves even said it worked with the RB1. Are you sure that it wont work with the RB1?
  12. T

    Antennae for RB1

    I am looking to buy and RB1 to replace my RBQ and was wondering if anyone had any pictures of where the antennae mounts on our trucks for the RB1. Thanks.
  13. T

    Looking for RB1 or RB4

    After more research I need to have my ipod adapter work and it looks like the RB4 does not support it, so it looks like I am really only looking for an RB1. Thanks any way.
  14. T

    Looking for RB1 or RB4

    If the price is right I would like to get one of these to upgrade my RBQ.
  15. T

    Fuel system Question?

    I replaced my fuel pump recently and I broke some part of the vapor system. There is a white plastic part that looks like the fuel pump and is mounted like the fuel pump on top of the tank but it is mounted more towards the front of the tank. The vent tube from the filler kneck attaches to it...
  16. T

    RBQ radio question

    Does anyone know if the factory RBQ radios that came in our trucks are (J-1850 style audio systems)?Or are they the newer CAN bus systems?
  17. T

    May need a new fuel pump.

    Recently my truck has been turning over but not wanting to start then if I wait a second it fires up. I am thinking my fuel pump is intermittently going in and out. I found the part number 5134555aa and the only place I can find it is at the dealer for 294.00 Does anyone know if I could find it...
  18. T

    towing hitch?

    I thought about drilling a hole for about a tenth of a second and then just couldn't bring myself to do it. To be honest with you I doubt anyone would ever notice but it was just to easy to take the cover off.
  19. T

    towing hitch?

    Get the after market one. All you have to do is remove the side skirts and the bumper cover it takes about 20 minutes. You don't have to cut the bumper cover. All you have to do is trim the opening a 16th to an 8th of an inch, and it is just as good as the factory one.
  20. T

    towing hitch?

    I ended up buying an after market one for a 1500 and all I had to do was shave about a 16th of an inch around the opening in the rear valence to make it fit. For 75 dollars as compared to 180 to 200 anywhere else it worked out perfect and it only took about 20 minutes to install not including...
Back
Top