06 owners, need a lil help

[JTS VENOM PERFORMANCE]

Having some brake lines made up for the 06 models, but they are completly different from the others.

The front brake line is mounted to the outter coil mount, or basically where the line goes thru the frame.

anyway if someone could I need the inside diameter of the hole the line goes thru, and the thickness of the metal also would be good.

It shouldnt be too bad, just remove the bolt holding the line, pull the line back and it should give enough room to take the measurements

thanks in advance:rock:

 

[Annu Kumar]

I'm Not gonna touch shit

 

[ohiosrt10]

Uhhh... I'd like to help you but my truck is in the garage where it is currently 16 degrees. Can you wait until April?!

 

[JTS VENOM PERFORMANCE]

Uhhh... I'd like to help you but my truck is in the garage where it is currently 16 degrees. Can you wait until April?!

LOLLOL If I have to bro

Isa hopin somebody would take a lil, means a killer deal on the front set

 

[RedSrt007]

I can get if for you tonight

 

[ohiosrt10]

I can get if for you tonight

San Diego?! Dammit.. If I was there, I would have already had it for ya...

:rock: :rock: :rock: :rock: :rock:

 

[wyoramsrt-10]

Stinker you should buy another 05 and a 06.........................................then your problem would be solved :rock: :elefant: :elefant:

 

[JTS VENOM PERFORMANCE]

Thanks Patrick:rock:

Dont worry bro, the 04-05 guys are gonna be pissed, the 06 front kits are gonna be cheap

There shouldnt be alot to them, plus they are short short short

 

[Dom426]

not jumpin on your thread but wouldnt be a better idea to.........................just kiddin i have no good ideas!! stinker get it done..

 

[alexspop]

Is this the line you are talking about?

Here's what I got; .716" diameter, .150" for thickness

 

[JTS VENOM PERFORMANCE]

Is this the line you are talking about?

Here's what I got; .716" diameter, .150" for thickness

May be is that the size of the hole in where the mounting part of the line goes thru?

and the thickness of the area it goes thru?

thanks bo

I wish I had a pic of the area, but no 06 in th stable

 

[Dom426]

fine give me the cold shoulder lol

 

[alexspop]

Roget that, it is the hole that the line goes through going out to the caliper.

 

[JTS VENOM PERFORMANCE]

Is this the line you are talking about?

Here's what I got; .716" diameter, .150" for thickness

Yeppers, now is that bracket welded to the frame? cant tell the pic is a lil dark
but is the .716 the inside diameter of the hole or the diameter of the part going thru it, cuz I need the actuall reading of the hole itself, the only way I can find to do a line is a different kind of fitting that will fit thru the hole

 

[JTS VENOM PERFORMANCE]

fine give me the cold shoulder lol

I got something warm I can put on ya shoulder

 

[alexspop]

Yeppers, now is that bracket welded to the frame? cant tell the pic is a lil dark
but is the .716 the inside diameter of the hole or the diameter of the part going thru it, cuz I need the actuall reading of the hole itself, the only way I can find to do a line is a different kind of fitting that will fit thru the hole

The bracket is welded to the frame and the bumpstop bracket. The .716 is the inside diameter of the hole.

 

[JTS VENOM PERFORMANCE]

The bracket is welded to the frame and the bumpstop bracket. The .716 is the inside diameter of the hole.

cool beans bro :rock: Thanks

 

[alexspop]

cool beans bro :rock: Thanks

No problem. Keep us posted!

 

[Dom426]

I got something warm I can put on ya shoulder

oh really....................i dont want to know.................hey hows the truck comin...............you have had plenty of time............................................................hey justin is doin a twin turbo setup for me