2006 Quad Cab to RC Auto transmission swap parts

6speedquadcab

NorCal SF Bay Area
Supporting Member
Joined
Nov 11, 2014
Messages
3,132
Reaction score
37
Location
South Bay
So now that my truck is halfway done being converted, I have all the left over parts for a auto swap. I really need a 06 RC steering column shroud. If anyone wants to do a swap, we can trade steering columns so that we both get what we need, as long as they are complete and in good condition. If not, I'll be parting everything out and posting up prices for all parts.
 
Well, decided to part everything out since I didn't get much interest from anyone for a swap package.

All came off my 61K mile 06 and are in great if not excellent condition.

Solid 48RE transmission including torque converter, flexplate, spacers, dip stick with tube, and all hardware. $500 + shipping.

Oil cooler lines and transmission oil cooler radiator $200 + shipping.

Semi new less than 200 miles stock 2 piece driveshaft $200 + shipping.

Shifter cable $100 + shipping.

Complete auto steering column in excellent condition only available for trade for your complete 06 RC steering column in excellent condition as well.

Will post pictures as soon as possible.
 
Last edited:
Well, decided to part everything out since I didn't get much interest from anyone for a swap package.

All came off my 61K mile 06 and are in great if not excellent condition.

Solid 48RE transmission including torque converter, flexplate, spacers, dip stick with tube, and all hardware. $500 + shipping.

Oil cooler lines and transmission oil cooler radiator $200 + shipping.

Semi new less than 200 miles stock 2 piece driveshaft $200 + shipping.

Shifter cable $100 + shipping.

Complete auto steering column in excellent condition only available for trade for your complete 06 RC steering column in excellent condition as well.

Will post pictures as soon as possible.

Will the drive shaft work with a 4WD hemi if I swap the rear end as well?
 
No, it would be entirely too long.
 
Is the carrier bearing included with drive shaft? Is it a couple hundred miles from new or 60k plus?
 
So now that my truck is halfway done being converted, I have all the left over parts for a auto swap. I really need a 06 RC steering column shroud. If anyone wants to do a swap, we can trade steering columns so that we both get what we need, as long as they are complete and in good condition. If not, I'll be parting everything out and posting up prices for all parts.

Man, if you were closer, I'd be all over that 48RE..
 
Is the carrier bearing included with drive shaft? Is it a couple hundred miles from new or 60k plus?

Carrier bearing is included and 200 miles from new. My whole driveshaft was replaced after my truck was hit earlier this year by some drunk asshole.
 
Also have the 06 QC engine wiring harness up for grabs. $150 + shipping.
 
Well, decided to part everything out since I didn't get much interest from anyone for a swap package.

All came off my 61K mile 06 and are in great if not excellent condition.

Solid 48RE transmission including torque converter, flexplate, spacers, dip stick with tube, and all hardware. $500 + shipping. PENDING SALE

Oil cooler lines and transmission oil cooler radiator $200 + shipping.

Semi new less than 200 miles stock 2 piece driveshaft $200 + shipping.

Shifter cable $100 + shipping.

06 quad cab engine wiring harness $150 + shipping.

Complete auto steering column in excellent condition only available for trade for your complete 06 RC steering column in excellent condition as well.

Will post pictures as soon as possible.

Updated list guys.
 
4th of July sale bump! Shoot me an offer on these parts guys. I don't have room for them so I gotta sell them quick.
 
Is the transmission still up for sale and where are you located?
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top