71dusterjon
Full Access Member
anyone know if autometer will/could make few gauges the same way they did for the oil temp in our trucks?
autometer gauges..
- Thread starter 71dusterjon
- Start date
Floor
Full Access Member
no they will not.
I checked this a while ago and this was the reply from Autometer:
"We do not offer a series of gauges that will exactly match your SRT gauge series. Chrysler specified different lighting for both SRT-4 and -10 series instrumentation.
You may want to take a look at our Cobalt (http://www.autometer.com/cat_gaugeop.aspx?sid=4) series. While there is no exact match, it’s the closest match we currently offer"
I checked this a while ago and this was the reply from Autometer:
"We do not offer a series of gauges that will exactly match your SRT gauge series. Chrysler specified different lighting for both SRT-4 and -10 series instrumentation.
You may want to take a look at our Cobalt (http://www.autometer.com/cat_gaugeop.aspx?sid=4) series. While there is no exact match, it’s the closest match we currently offer"
razorbackfan
Full Access Member
This sucks. I did snag the part numbers for some of the guages though
P4510435 A/F
P4510525 Boost
P4510434 Fuel Pressure
P4510432 Water Temp
There were a bunch of others but I only was intersted in these. They are discontinued but I"m sure the lighting can be changed to match whatever.
P4510435 A/F
P4510525 Boost
P4510434 Fuel Pressure
P4510432 Water Temp
There were a bunch of others but I only was intersted in these. They are discontinued but I"m sure the lighting can be changed to match whatever.
razorbackfan said:
just buy the gauge and make ur own, or have someone do it 4u
anyone that does custom graphics should be able to do it......
i dont thinkk your going to find SRT gauges anywhere
razorbackfan
Full Access Member
there is definately none in the stock system, I just called my dealer and he can locate a water temp gauge but that's it out of the 4 I have listed.
Yeah, I'm going to my graphics guys to see what they can do.
Yeah, I'm going to my graphics guys to see what they can do.
71dusterjon
Full Access Member
id like to see how they come out with a graphics guy.
Texas Yellow Fever
Full Access Member
razorbackfan said:
Making the faces should be easy actually, we've made faces for airplane guage restoration. Getting them on/off might be a little testy if you have to remove the needle/pointer or whatever. You're liable to screw up the calibration. If you could find a gauge that just needs the logo added to it, that would the simplest solution.
i made a few - i was going to install in some AM, gauges - but i bought the EGS instead, so i never used them, i can post pic's up tongiht after i get home from work.....
razorbackfan
Full Access Member
Texas Yellow Fever said:
Ok, so my graphics guy is aware of the situation.
I didn't even have to call. Steve I have the pics you wanted, just waiting on a day to get up to Fayetteville again.
Oh and I forgot to mention to you that I met Mike Anderton the other day and I mentioned you and he told me some stories.
Texas Yellow Fever
Full Access Member
razorbackfan said:Ok, so my graphics guy is aware of the situation.
Steve I have the pics you wanted, just waiting on a day to get up to Fayetteville again.
Oh and I forgot to mention to you that I met Mike Anderton the other day and I mentioned you and he told me some stories.
Stories? There ain't no stories out there about me...
be careful like steve says its easy to mess up calibration on them, but hte ones from mopar expecilly the air fuel is not very accurate
Support Us
Become A Supporting Member Today!
