razorbackfan
Full Access Member
I got the baseline pulls done so the modding can begin in ernest now.
The pulls were on the low side but I expected this being it was a Mustang w/eddiebrake and I'm a auto QC.
I did three runs but it only recorded the last two which were the lowest. I couldn't get my TC locked so I was pretty happy.
394/408 first pull
376/397 second pull
354/369 third pull
The third pull I installed the SCT with a DC performance tune. It wasn't made for my truck but another '05 QC. I figured wyo's truck (who I bought the SCT from) was pretty close except for having headers. Obviously not. I wasn't expecting alot here but I thought maybe it would get me over 400.
Ambient temp was 101 so it was hot. Temp on the truck was 200 with oil temp 185. I unhooked the detent on the trans to keep from kicking down (which it did not).
The big question I have is at 5200rpm it missed or rev limited somehow. Is this normal? I've never dynoed a Ram SRT10 before even on my dyno so I'm not famaliar with this. It happened on all three runs at exactly the same time. I shut down as soon as it happened so I don't know if it would have pushed past this or what.
Anyway, I am happy with the results and the dyno guy is pretty close to me so I shouldn't have a problem tracking him down for a delta.
The pulls were on the low side but I expected this being it was a Mustang w/eddiebrake and I'm a auto QC.
I did three runs but it only recorded the last two which were the lowest. I couldn't get my TC locked so I was pretty happy.
394/408 first pull
376/397 second pull
354/369 third pull
The third pull I installed the SCT with a DC performance tune. It wasn't made for my truck but another '05 QC. I figured wyo's truck (who I bought the SCT from) was pretty close except for having headers. Obviously not. I wasn't expecting alot here but I thought maybe it would get me over 400.
Ambient temp was 101 so it was hot. Temp on the truck was 200 with oil temp 185. I unhooked the detent on the trans to keep from kicking down (which it did not).
The big question I have is at 5200rpm it missed or rev limited somehow. Is this normal? I've never dynoed a Ram SRT10 before even on my dyno so I'm not famaliar with this. It happened on all three runs at exactly the same time. I shut down as soon as it happened so I don't know if it would have pushed past this or what.
Anyway, I am happy with the results and the dyno guy is pretty close to me so I shouldn't have a problem tracking him down for a delta.