Just to give a little reminder, relocated the battery to under the rear of the bed. Here's a few pics, and notes
1. Pulled battery box and cables.
2. used a cut off wheel and used parts from factory battery box to relocated fuse box and remount the ABS module.
3. replace alternator cable with a larger size 2 guage
4. replace engine to frame ground wire with 2 guage
5. ran a 1 guage cable to rear of truck and mounted
6. custom built battery holder in place of spare tire.
7. connect ground cable from battery to frame and positive cable to battery and go.
Any Q's let me know.
1. Pulled battery box and cables.
2. used a cut off wheel and used parts from factory battery box to relocated fuse box and remount the ABS module.
3. replace alternator cable with a larger size 2 guage
4. replace engine to frame ground wire with 2 guage
5. ran a 1 guage cable to rear of truck and mounted
6. custom built battery holder in place of spare tire.
7. connect ground cable from battery to frame and positive cable to battery and go.
Any Q's let me know.
Last edited: