Belanger + high flow cats + B&B ?

[Sammy11]

does anybody ever build a B&B catback at Belanger long tubes + high flow cats on a 2006 QC ?
and if so , did you need the mids from B&B along with the catback to mount ?

 

[Sammy11]

nobody knows ??? :dontknow:

 

[WA 2 FST]

I have an RC, but my B&B cat-back had to be modified to fit with the Belanger LT + catted H-pipe.

 

[SRT2SLOW]

You just need mid pipes to meet up with b&b. Unless you already have full 3" from the cats to the magnaflow.

 

[Arska2]

Sammy,

B&B manufactures catback system that bolt up to their own headers with midpipes and also to the stock setup.

So even if it will not bolt right up, a welder could easily help you with fitment for a few dollars.

 

[Sammy11]

ok , so i guess i need the mids...

 

[bmxam962]

Sammy looks like you have 3" mids. That small extension after your mids is for qc. Because of longer truck. I am pretty sure you just need that cat back for a qc hope this helps

 

[SRT2SLOW]

Those are stock extentions. So u have 3" mid pipes going in the stock 2.5 piping then back to a 3" exhaust. Just cut it off where the mid pipes end and have a exhaust shop make u 3" extensions.

 

[Sammy11]

Those are stock extentions. So u have 3" mid pipes going in the stock 2.5 piping then back to a 3" exhaust. Just cut it off where the mid pipes end and have a exhaust shop make u 3" extensions.

ok , or i'll order the mids from B&B together with the catback...

 

[Bhpaddict]

he's going B&B. I'm officially jealous