Braided Nos lines
- Thread starter spray
- Start date
or you can have them custom made
yep, any type of line most of the time, I am supposing 3an lines?
but I think I can do them with red or black ends if not mistaken , depends on what they have in stock as far as colors.
they usually dont run too much I dont think , I would have to check on the prices and see.
we just sent some stainless steel lines to a member for him to bend and make him some nice stainless lines, but they are a real bitch to flare the ends on those.
the braided ones are much easier to work with
but I think I can do them with red or black ends if not mistaken , depends on what they have in stock as far as colors.
they usually dont run too much I dont think , I would have to check on the prices and see.
we just sent some stainless steel lines to a member for him to bend and make him some nice stainless lines, but they are a real bitch to flare the ends on those.
the braided ones are much easier to work with
gotcha, -4an lines in the sizes listed above, will do, it may take awhile, will try to call this evening, so far havent been off the phonespray said:
mondays........gotta lovem
FerrariTruck
Full Access Member
hey tony do you think you can make me a new fuel line?
I need it with a 45deg angle on the solenoid and a 90 where it hooks to the fuel rail????
I need it with a 45deg angle on the solenoid and a 90 where it hooks to the fuel rail????
Stinker said:gotcha, -4an lines in the sizes listed above, will do, it may take awhile, will try to call this evening, so far havent been off the phone
totally understand. Oh and by the way the oil lines and power steering lines worked great. Thanks
FerrariTruck
Full Access Member
spray said:Pulling fuel from fuel rail, BAD idea.....
2nd best to a dedicated fuel system
thats how a lot of the system here are done even jmb 11.4 beast
FerrariTruck said:2nd best to a dedicated fuel system
thats how a lot of the system here are done even jmb 11.4 beast
Yea, going 2nd best just cost me 9k
I just bought a dedicated fuel system from jmb that was real nice and easy to install.
just my 2 cents, Good Luck.:rock:
I can and will but I dont reccomend it bud, that fitting is jsut way to easy to break , especially with vibrations an such,
it will work I jsut can reccomend it
but yeah what size and length?
it will work I jsut can reccomend it
but yeah what size and length?
FerrariTruck
Full Access Member
Stinker said:I can and will but I dont reccomend it bud, that fitting is jsut way to easy to break , especially with vibrations an such,
it will work I jsut can reccomend it
but yeah what size and length?
ah man you know what im not sure what size the fittings are, let me get back to ya
FerrariTruck
Full Access Member
spray said:
care to elaborate on your system?
And what failed?
the only difference will be the fitting, , ya got to understand tho, for liability reasons I cant say it will work, if I did and it broke while you were driving it and you went up in a blaze of flames.....................you might not like me too muchFerrariTruck said:
:toilet:
FerrariTruck
Full Access Member
Stinker said:the only difference will be the fitting, , ya got to understand tho, for liability reasons I cant say it will work, if I did and it broke while you were driving it and you went up in a blaze of flames.....................you might not like me too much
no promblema tony, this all my deal
Eventually running a dedicted fuel supply and cell is what i want so i can keep it full of 116. Im just in a "rush" to spray this 31st.
FerrariTruck said:no promblema tony, this all my deal
Eventually running a dedicted fuel supply and cell is what i want so i can keep it full of 116. Im just in a "rush" to spray this 31st.
FerrariTruck said:care to elaborate on your system?
And what failed?
1st I bought a direct port system from cold fusion then I got with justin and got a small fuel cell to go in the bed with braided lines going up front with a regulator and then a return line going back to the fuel cell. I put in the fuel cell and ran the lines for the gas side yesterday this week I am going to put the selinoids on.
It was a real nice simple fuel system Justin came up with.
Support Us
Become A Supporting Member Today!
