Brakes need to do them.

Discussion in 'General Discussion' started by 05 Red, Sep 23, 2023.

Car Parts
  1. Sep 23, 2023 at 1:11 AM #1
    05 Red

    05 Red New Member

    Messages:
    26
    Likes Received:
    21
    Joined:
    Oct 10, 2022
    The rotors and pads needed. Probably lines too.
    EBC seem to be the most available option along with Power Stop.
    Anyone have any opinions on what to go with ? When i'm in there i plan on taking the calipers off and painting them.
     
    Wifey likes this.
  2. Sep 23, 2023 at 2:33 AM #2
    Michael from the U.K.

    Michael from the U.K. Active Member Supporting Member

    Messages:
    352
    Likes Received:
    42
    Joined:
    May 22, 2006
    Location:
    Berkshire in England
    I have the ebc rotors with yellow pads,the look and work very well.

    We need to be able to stop these beasts
     
    Wifey likes this.
  3. Sep 24, 2023 at 1:30 AM #3
    05 Red

    05 Red New Member

    Messages:
    26
    Likes Received:
    21
    Joined:
    Oct 10, 2022
    the green stuff pads are apparently good too, but ill take any pad that doesn't squeak or squeal
     
    Wifey and Michael from the U.K. like this.
  4. Sep 24, 2023 at 7:34 AM #4
    Michael from the U.K.

    Michael from the U.K. Active Member Supporting Member

    Messages:
    352
    Likes Received:
    42
    Joined:
    May 22, 2006
    Location:
    Berkshire in England
    Can’t remember which are softer or their compatibility but mine don’t squeak or squeal,come to think of it there is an occasional squeal from the back somewhere lol
     
    Wifey likes this.
  5. Sep 26, 2023 at 12:27 AM #5
    Srt10650

    Srt10650 Full Access Member

    Messages:
    357
    Likes Received:
    300
    Joined:
    Sep 30, 2016
    I run powerstop pads/rotors and have no complaints. Stops on a dime and low brake dust.
     
    Wifey likes this.
  6. Sep 26, 2023 at 11:37 AM #6
    HemiLonestar

    HemiLonestar Active Member Staff Member Super Moderator

    Messages:
    95
    Likes Received:
    105
    Joined:
    Dec 31, 2009
    Location:
    MD
    Been running Power Stop rotors and Z23 pads for years now. No squeal, nice smooth (and fast when necessary) stops.
     
    Wifey likes this.
  7. Sep 27, 2023 at 8:40 PM #7
    Wifey

    Wifey Well-Known Member

    Messages:
    23,532
    Likes Received:
    622
    Joined:
    May 18, 2006
    That could be on acceleration - pay attention next time you floor it and see if that's it :cool::D:rolleyes:
     
    Michael from the U.K. likes this.
  8. Sep 30, 2023 at 11:01 PM #8
    beastmode1

    beastmode1 Full Access Member

    Messages:
    575
    Likes Received:
    353
    Joined:
    Oct 2, 2014
    Location:
    Denver, CO
    I am doing mine as well I purchased Wagner semi metallics for both fronts and rear, Rotors went with Detroit Axle Brakes and Rotors and they are USA made no China Crap worked well on my other trucks. I also added VIPER Stickers on my rotors fronts and back had a fella from Israel make em for me, and painted the rotors as well. My 10 NR really stands out.
     
    Michael from the U.K., Wifey and rottenronnie like this.
  9. Oct 9, 2023 at 7:26 PM #9
    VIPR PWR

    VIPR PWR Full Access Member

    Messages:
    5,403
    Likes Received:
    718
    Joined:
    Jun 12, 2007
    Location:
    FL
    I’ve been using Zekhausen pads since I replace the factory brake dust squealers … work great , no dust or squealing .

    https://www.zeckhausen.com/
     
    Wifey likes this.