Calculators , ie , 1/4 vs weight etc etc kina kool

[SRT10VENOMOUS]

http://www.wallaceracing.com/Calculators.htm

 

[nycstev]

Great link . have to BM this one:rock:

 

[AWDisuzu]

nice! I don't have to waste time at the track now!

Your ET / MPH computed from your vehicle weight of 6500 pounds and HP of 500 is 13.70 seconds and MPH of 97.83 MPH.

 

[SRT10VENOMOUS]

is that fairly acurate for a stock qc..??

 

[ViperTruck2933]

I don't think those are very accurate. It says that my 13.07 with 5200 weight puts me at 460 hp at the flywheel. It also says my 60' should be 1.7.

Yeah right. :dontknow:

 

[Rice Eater]

cool link! You missed it last night ken.....vprhlr, 2ndchance and que locura and I went to morosso. I ripped off a 12.9 @ 109mph on motor biiiatch! My spray is not workin at the moment....Zex is sending me a new box.

What is the weight of an 04 RC anyways?

 

[JTS VENOM PERFORMANCE]

RC cola is about 16 ounces

 

[Rice Eater]

RC cola is about 16 ounces

Smart Ass

Come on Sawwwwer....I know you know!

 

[JTS VENOM PERFORMANCE]

Smart Ass

Come on Sawwwwer....I know you know!

go with bout 5200lbs or 5100 without tailgate and spare

btw I was in your kneck of the woods the other day, dania beach,palm beach, melbourne , and ft meyers.

 

[AWDisuzu]

it probably assumes no tire slippage, ie slicks. it's impossible really to account for tire spin without asking for the tire width and diameter, tire pressure, friction coefficient, weight over each axle, an accurate torque curve, launch rpm and launch style, etc.

I have a program called cartest 2000 that takes all that imput for a very accurate 1/4 mile guess.

but yea, the program here is pretty accurate for a QC (no tire spin)

~mike~

I don't think those are very accurate. It says that my 13.07 with 5200 weight puts me at 460 hp at the flywheel. It also says my 60' should be 1.7.

Yeah right. :dontknow:

 

[Rice Eater]

go with bout 5200lbs or 5100 without tailgate and spare

btw I was in your kneck of the woods the other day, dania beach,palm beach, melbourne , and ft meyers.

WTF!!!!????:dontknow:

Why didn't you call me and we coulda grabbed a burger?

 

[Rice Eater]

when i calculate my HP on both motor and spray runs........it comes out a lot higher if I use the MPH than if I use ET. Guess I gotta get dem 60's down more.

 

[JTS VENOM PERFORMANCE]

WTF!!!!????:dontknow:

Why didn't you call me and we coulda grabbed a burger?

LOLOL really didnt have the time bro, I really wanted to get a lunch with a couple of you fellas, but lets put it this way I started early one morn in tampa then to a job site in orlando, then the next day went to melbourne, wellington, dania, then across to ft meyers
and had a little problem at home needed to take care of so drove back that night

 

[mopar_mudder]

Ya ok, says I am making 563hp based on my MPH, :rock: , ya I don't think so.


Oh based on ET it says 493, that is a little more real, think I will stick to track and dyno number and not made up ones.

Tried some more of the link on their, funny how they all give you different answers

 

[Rice Eater]

LOLOL really didnt have the time bro, I really wanted to get a lunch with a couple of you fellas, but lets put it this way I started early one morn in tampa then to a job site in orlando, then the next day went to melbourne, wellington, dania, then across to ft meyers
and had a little problem at home needed to take care of so drove back that night

No prob! I aint mad atcha....long as you look me up next time!!:rock:

 

[SRT10VENOMOUS]

cool link! You missed it last night ken.....vprhlr, 2ndchance and que locura and I went to morosso. I ripped off a 12.9 @ 109mph on motor biiiatch! My spray is not workin at the moment....Zex is sending me a new box.

What is the weight of an 04 RC anyways?

common now 12.9 is that it??? if i put thoes mods on my ride and did a run up here in canada that would be a 12.4 hehe.... so hows that project doin down there???