Caltracs

[6speedquadcab]

Does anyone know if the mounting bracket for the Caltracs is different for a lowered and stock suspension truck?

 

[oldcolt]

My truck is lowered....I bought mine from Tony when I got his lowering kit. Maybe shoot him a note to see what he says.

 

[Slitherbeast]

there is no difference for the Regular cab(axle housing is above the leaf springs). Not sure with the Quadcab (axle below the springs)

 

[amtrucker22]

Quad Cabs there is a difference! You need to contact Tony if you have the stock height piece.

 

[JTS VENOM PERFORMANCE]

there is a difference between rc and qc, and a difference from a lowered qc and a standard height qc also
front pivot, and bars , and even the rear location is all different from model to model sir,

 

[Sammy11]

they need to adjust from time to time , because they start to rattle , then its just like u drive a crappy truck...

accept for that , they do work.

 

[bmxam962]

they need to adjust from time to time , because they start to rattle , then its just like u drive a crappy truck...

accept for that , they do work.

Hey Sammy they make some heim joints that would fix that noise problem. Also be cautious about tightening them up to much as ride with get really stiff.

 

[6speedquadcab]

I bought these directly from Caltracs. But I believe that they sent me the wrong ones then because the ones I requested are supposed to be for a QC with a stock suspension. And these look like they were meant for a truck with a flip kit.

 

[6speedquadcab]

For those that are curious, or don't understand what I am talking about.

 

[amtrucker22]

I had the wrong parts and Caltracs was great to work with. I am sure if you call them they will take good care of you.

 

[6speedquadcab]

I will certainly do so. I'll let them know that the thugs and gangsters from the VTCoA sent me. Thanks for the input everyone!

 

[MOD(S)QUAD]

Looking at your pic you definitely have the wrong kit

I've dealt with them too and they are good people there......good luck