Cam Bearings.....

[Manic]

The only thing you know about custom grinding is from a stripper

And he pays for that too... :dontknow:

 

[JTS VENOM PERFORMANCE]

he is constantly stripping some women!LOLOLOL

 

[Blakewilder]

Yeah.....You live and learn I guess. But I woulda never picked the truck up without seeing DYNO numbers.....You knew your shit wasnt running right. Because you got a dyno sheet sayin that on their best run you were pullin 500 horse right.....Imagine spending 50k and having the place tell you sorry our dyno is busted...heres your truck. i think its prolly 750 horse.....here ya go...have fun on your 10 hour trip.....NOT!

 

[Blakewilder]

AND ....NO I dont pay for grinding at the "car wash" hehe codeword for Rachels (they have a detailer working til 4am....hence "carwash")

 

[Blakewilder]

Hey Dave....did u get straightened out with DC performance? Is your blower flash on theway or what? Your gonna smoke that dude that beat you once you get that flash....

 

[RACKETMAN]

some peoples are not as smart as you seem to be,, to bad.... they dont seem to be very bright:dontknow:

 

[Manic]

AND ....NO I dont pay for grinding at the "car wash" hehe codeword for Rachels (they have a detailer working til 4am....hence "carwash")

ummmm, ongoing credit or prepaid?

 

[Dave T(BADVENM)]

Hey Dave....did u get straightened out with DC performance? Is your blower flash on theway or what? Your gonna smoke that dude that beat you once you get that flash....

When I ordered it last thursday I was told they didnt have any in stock and that it should ship this week. I'm in Denver til friday morning so as long as it gets to my house by the time I return I'm ok. Dan seemed confident that the WOT timer delay was the problem as he has seen my situation on the dyno.

 

[pscmopar]

nope....they align bore the block so that they can install "babbit" bearings similar to an AMC motor. ACtually I think the parts are AMC parts...I dont know much about it but if Boomer was gonna use this method for his PERSONAL vehicle......Im confident that it will work. Proline is gonna assemble the motor and everything so all True has to do is install it in the truck.....hopefully it will work.

Just talked to ED@ proline...he said once the block is bored and the cam bearings are installed it uses the Stock size cam. Mine is a Comp Coupe cam (custom grind).

The process was developed by Evans Speed Equipment in El Monte, CA. The tech article called "Saving the Viper" was published in the Engine Masters Summer 2005 Vol. 8 magazine. It shows the entire process which ends up using the #2 cam bearings used in the Dura-Bond AMC 290-401 V8 kit. It's a good read if you have access to the article

 

[Silverback]

some peoples are not as smart as you seem to be,, to bad.... they dont seem to be very bright:dontknow:

Okay, I will bite. What the Fu*k you mean by that remark. :dontknow:

 

[Manic]

Well he hasn't start chatting about making a dump truck out of a SRT10 yet....