Catch Can update w/Stinkers Steel Braided Lines...

[Psycho Mythic]

Just a few pics, the line kit from Stinker is awesome, but you wont be able to use the filter your JMB catch can comes with because the new AN fitting that Stinker sends is slightly larger and the filter will hit it and not slide all the way down, i had to modify it a bit but i think it looks fine and will work great.

Also, how do ya like my "chrome silver" powdercoat job ? I did it myself at work this week:rock:

 

[wesalbert]

Purdy!! :rock:

 

[TNVIPER]

Almost any thing can be made to work with a little imagination.......:rock:

 

[blackviper]

Very nice.

 

[cyalata]

Just a few pics, the line kit from Stinker is awesome, but you wont be able to use the filter your JMB catch can comes with because the new AN fitting that Stinker sends is slightly larger and the filter will hit it and not slide all the way down, i had to modify it a bit but i think it looks fine and will work great.

Also, how do ya like my "chrome silver" powdercoat job ? I did it myself at work this week:rock:

all i can say is sweeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeet :congrats: :congrats:

 

[Ram From Hell]

Looks like you petcock is a little tarnished.

 

[Psycho Mythic]

Looks like you petcock is a little tarnished.

??Petcock??

 

[mysrt10]

your "petcock" would be your catch can drain valve

 

[Psycho Mythic]

your "petcock" would be your catch can drain valve

Ooohhhh, i let all the fitting soak in some industrial "hot soap" we use to degrease dies at work and it brightened the copper and darkened the brass

 

[ZCx]

sweet:rock: :rock: :rock: :rock: :rock:

made an extension & went through the heat shield & have the draincock just under the bottm. a peice of clear hose on the nipple of the cock & a no fuss/no muss drainage
:rock: :rock:

 

[Ironhead]

thats the first one i have seen with that bent style filter ,,, were did it come from

 

[JTS VENOM PERFORMANCE]

Cody sent me a pm saying the line didnt really fit ove r the valve cover fitting so we may have to swap to a 8 an line