collecting parts to build my engine.

[BLWNSRT]

So i am planning my engine build this winter, I am ordering the upper and lower gasket set the end of the week. My idea is to get some parts every month so the cost doesnt seem too much all at once.

Which Cam should i go with?

Roe 710
compcams 97-320-10
Mopar performance one

Next month or so i am going to order:

Stinkers coil packs
Arp head stud kit
comp cam valve springs
billet main caps

What else is a good idea to get i will probably get some head work done locally i am going to get the same guy that built Joe & Tylers engine.

 

[eddie102870]

being you have a roe id get a custom cam they run about 600 from what i see, justin has one that may work for your application pretty cheap. might save you some dough.

 

[rottenronnie]

Forged pistons and rods (along with a balance of course).

 

[Yellow venom]

Get ahold Of Louie at AMS Jeff,set up a meeting with him to discuss what you want to do at the end with your engine and he will walk you through the process and get you all the right parts. He will also design you a cam also,pistons,compression ratio etc...

 

[JTS VENOM PERFORMANCE]

be careful on your orders , the program mains are on backorder right now, , and the k1 rods are about 6-8 weeks out

 

[BLWNSRT]

Forged pistons and rods (along with a balance of course).

I talked to Louie on the phone I am forging the bottom end and balencing. Joe I did know that Louie can do the cam also, well I guess I will just get the little things first.

Stinker how long is the waiting list for the mains or isthere one?

 

[JTS VENOM PERFORMANCE]

not sure buddy, but will call and check tomorrow, I tried gettin some about a week ago, or a couple weeks and program was completely out and ddint know when, but I need some more, so wil check an let ya know buddy,

I am also waiting on about 5 sets of k1 rods, and well they are saying 6 weeks at the moment, I have one set store for mcluvin and allready had a guy from russia trying to buy them from me LOLL, so they are edef in got demand right now

 

[BLWNSRT]

Thanks let me know, also added to the list cause I just remembered

ATI balencer
Stinkers overdrive pulley
caltracs

Tony your gonna be busy

 

[JTS VENOM PERFORMANCE]

Thanks let me know, also added to the list cause I just remembered

ATI balencer
Stinkers overdrive pulley
caltracs

Tony your gonna be busy

LOL not a problem good sir, jsut put in an order for some caltracs today

 

[DevilDawg3097]

not sure buddy, but will call and check tomorrow, I tried gettin some about a week ago, or a couple weeks and program was completely out and ddint know when, but I need some more, so wil check an let ya know buddy,

I am also waiting on about 5 sets of k1 rods, and well they are saying 6 weeks at the moment, I have one set store for mcluvin and allready had a guy from russia trying to buy them from me LOLL, so they are edef in got demand right now

k1 RODS ARE THE SHIT:rock: :rock: :rock:

 

[nycstev]

:burnout: get a BBC and call it a day :dontknow: :rock:

 

[BLWNSRT]

:burnout: get a BBC and call it a day :dontknow: :rock:

I read that somewhere and totally ignored it I think it was in the blackviper engine build. Not going to happen. EVER

 

[LoveThisTruck]

What's a BBC?:dontknow:

 

[BLWNSRT]

What's a BBC?:dontknow:

Big block chevy

 

[LoveThisTruck]

Big block chevy

OH Go for it. It'll be a lot cheaper, and probably faster too