Convert your Dana 60 to a Locker

LitemUp

LitemUp

Active Member
Supporting Member
Joined
May 22, 2006
Messages
2,262
Reaction score
6
Location
The Looney Bin
the Power Trax????

have it in my Dakota. love it
 
I've been thru this at least 5 times a year, and have found nothing that works with our c clip axles bo, i would love to find something tho.

Eaton actully made a locker for ours, actuallly two of them, but decided that there wasnt enough vehicles to do the deal:argh:

but if ya find somthing let me know, would really be interested in it:D
 
You don't think this will take our "C-clip"? Stink?

Brand: Strange Engineering
Product Line: Strange Detroit Locker Differentials
Part Type: Differential Carriers
Part Number: STR-D3535
Aftermarket Carrier Style: Gear-style locker
Cover Bolts: 10
Carrier Series: 3
Axle Shaft Spline Quantity: 35
Manufacturer of Axle: Dana
Carrier Material: Steel
Quantity: Sold individually.
Notes: Fits 3.54-4.10 Spicer gear ratios and U.S./Strange standard gear set.

Differential, Detroit Locker, 35-Spline, Dana 60, 3 Series, Each


str-d3535_w.jpg


Quick
 
If i had a part number I would gladly help and try and find out, but as of yet i have found nothing that does work, a picture dont help:eek:


edit let, me find out for yuns
 
If you contact strange, i believe they sell c clip eliminator for the dana 60. i its just a retainer plate,:)
 
yep they do, but and dont remember but i dont think they will work on our axles, or the brake set up, but i will call and talk with them tommorrow about it
 
Stinker said:
yep they do, but and dont remember but i dont think they will work on our axles, or the brake set up, but i will call and talk with them tommorrow about it
Click to expand...

There is nothing that 3600.00 won't fix.

Just get a stinker axle and drive on.

None of the parts discussed on this thread will work in the Dodge factory axle.

I went with MARK WILLIAMS 40 SPLINE, WITH A SPOOL IN THE SILVER TRUCK. Juxt the parts were 5K.

Got Tony's axle in the red truck and it works very well.
 
FSTJACK said:
There is nothing that 3600.00 won't fix.

Just get a stinker axle and drive on.

None of the parts discussed on this thread will work in the Dodge factory axle.

I went with MARK WILLIAMS 40 SPLINE, WITH A SPOOL IN THE SILVER TRUCK. Juxt the parts were 5K.

Got Tony's axle in the red truck and it works very well.
Click to expand...
go to bed:D
 
FSTJACK said:
There is nothing that 3600.00 won't fix.

Just get a stinker axle and drive on.

None of the parts discussed on this thread will work in the Dodge factory axle.

I went with MARK WILLIAMS 40 SPLINE, WITH A SPOOL IN THE SILVER TRUCK. Juxt the parts were 5K.

Got Tony's axle in the red truck and it works very well.
Click to expand...

that was a very easy install.....:D
 
love how cut and dry he is....no bullshit ...just truth...kinda reminds me of chuck norris:dontknow:
 
Love "Stinkers Rear End"...

I have the prototype...it was designed on my truck...it works...the only way to go...and if you ever pull the axles you will understand just how stout this rear end is!
 
The Dana 60 with the C clip is a tough nut to crack. I have researched this also.

I have been up at Summit in the past and couldn't find a fix (before Stinker's axle). Not saying this won't work, but I would be surprised.

I am still on the stocker, with a spare cryo'd in the garage. Once again, before Stinker made a kit.

It comes down to actually, buying what you think will work, and then being a test case on the install. Expensive route if it doesn't work.
 
so which is better????

c-clip or non c-clip?????????
 
The reason why I posted it was because I saw a similar kit being install on a Chevy limited slip rearend (similar to ours with spider, side gears, and clip) that worked and very easy to install. Easier than getting those spider gears IMO (No special tools required everything just slid in silky smooth). I was on a show called Gears on Speed Channel and done on a project called Knuckle Buster. I'm sure if you google or youtube it I bet you will find it. I would do it but I'm a little busy at work. If nobody has found it I look for it when I get home tonight.
 
they are checking at this moment, now they are not saying it cannot be done with alot of fabrication, but at the moment they dont know of a c clip eliminator that will work with our eom axle ends, Dodge did something different with them and they dont know of any that will work.

now we may be able to contact mopower1958, to me he may be more knoweldgable on the axle ends and may be able to tell us.
but they are also checking with detroit to see if they have a locker for the c clip axles yet
 
ok, nobody offers a c-clip locker for our axles, and to my knowledge and DTS's, and I looked around a good bit, but could not find a c-clip eliminator for a dana 60 as most of the 60's never came with c clips
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

20150524 065416 (1)
DSC 0063
bergman
image
Back
Top