Deep Dish SRT Rims

[Pirana131313]

I would be in if the could fit just the rear. That's bad ass

 

[seethrough]

What company are you guys contacting to make these wheels, I will be looking for 20 x 13 next year for my truck?

I am using Modulare Forged LLC. They were the second company that I worked with - the first one couldn't locate the 24" hoops in the widths that I needed.

 

[sinus19]

24"s ay woooo.. excited to see how those will look. What is the widest tire available for 22s and 24s? 305?

 

[VPRPWRD]

24"s ay woooo.. excited to see how those will look. What is the widest tire available for 22s and 24s? 305?

Think 3 digit numbers that start with 4.....

 

[ViperPete]

24" is too big.

Id want deep dish 22's

 

[05srt10carson]

Do you have the porgram for the deep dish 22

 

[sinus19]

Do you have the porgram for the deep dish 22

yea i got the model saved. it was made in SolidWorks.

 

[autorodtechnologies]

You would think they would make these wheels.. Very nice!!

 

[caveman]

Why doesn't one of you brainiacs design a lighter wheel for us? There are some serious performance gains to be had with a lighter wheel-tire combo.

 

[seethrough]

Why doesn't one of you brainiacs design a lighter wheel for us? There are some serious performance gains to be had with a lighter wheel-tire combo.

Someone already has - they are called Bogart Racing Wheels.

 

[seethrough]

24" is too big.

Id want deep dish 22's

The largest 22" I was able to find was a 315. If you move up to 24" you have the choice of 385/35 or 405/25. I purchased the 385/35 because I wanted more of the old school Road Runner look where the tire sticks up in the fender well. I also wanted a little more sidewall. Here is a shot of the tire mocked up with rolled fenders and tubed bed.

 

[seethrough]

Here is a side by side of the 385/35 R24 next to the stock tire.

 

[laviper93]

number

While i wait for parts and pretend i am working (Drafting/Designer at work)... I modeled some SRT rims, 22x11 with 3.8" deep lip and 4" back spacing. Anybody got $6,000 to get these made? (actually called to see how much they would cost to make..1,500 a rim!)

Who. Did you call call to get the price

 

[laviper93]

What's the number of the place that makes them or can make them

 

[Sammy11]

front wheels lip should be half size off the back wheels lip.

 

[sinus19]

What's the number of the place that makes them or can make them

What the rims? To be honest i dont remember lol.. ill have to look em up. Yea ive seen that Parillie makes 4??? For 24" tires! but i must agree, 24s are a little to bug for my personal taste

 

[laviper93]

For the 22×11 deep dish 3.4" the 3D pic you post

 

[sinus19]

For the 22×11 deep dish 3.4" the 3D pic you post

welp looks like i cant find the website anymore. I was just googleing "Custom Wheel Fabrication" and found it. Maybe they took down the site.