For Sale 5.7 HEMI CRATE MOTOR CARB.

[TheMoparConnection]

I have a a brand new in crate 5.7 HEMI Carbureted Engine. Engine is complete from oil pan to carb includes Next Generation Controller wiring harness for plug and play connection even comes with engine stand looking to get 7000.00 retails for 8639.00. was going to start a project but am not going to be able to. So I no longer have the need for it. It is Mopar Part Number p4510594.

 

[VNM PWRD]

Hey Robert ,
How much HP and TQ are we talking about ?

Cheers J.T.

 

[Manic]

Hey Robert ,
How much HP and TQ are we talking about ?

Cheers J.T.

Mopar Performance P4510594 - Mopar Performance 5.7L / 360hp Carbureted Hemi Engine

If modern technology with a touch of ''old school'' is your style, Mopar's 5.7L Carbureted Hemi may be what you're looking for. ''Plug and play'' technology allows it to accept low pressure (5-7psi) fuel delivery systems found on many past model vehicles. This engine produces 360 horsepower at 5400 RPM and 360 ft lbs of torque at 4200 RPM.

Specifications:

Built with all-new components
Completely assembled from carb to oil pan
Cast iron cross-bolted cylinder block painted Hemi Orange
Aluminum Hemi cylinder heads
Distinctive chrome valve covers
Heavy-duty cast crankshaft
Hydraulic roller camshaft
Cast pistons
Aluminum M1 single plane manifold with Holley 600 CFM four-barrel carburetor
Production high-flow exhaust manifolds
Roller timing chain and sprockets
Production flexplate
Heavy-duty connecting rods
High volume oil pump
''Plug and play'' wiring harness with NGC controller
Heavy-duty engine stand and shipping crate

 

[TheMoparConnection]

thats the one!!

 

[mauiSRT/10]

A guy I know from my local track put one in his 60's something Cuda. Runs in the high 12's. Sounds really good too.

patrick

 

[ChrisAZ]

Edited - Please contact TMC to resolve, and/or contact admin's first.

Thanks
RedSrt007

 

[Wifey]

Edited - Please contact TMC to resolve, and/or contact admin's first.

Thanks
RedSrt007.

I'm sure you have taken all preliminary steps of discussing this with Robert before airing dirty laundry :dontknow: :dontknow:

A little more detail would help - like an exact accounting of the incident.

Maybe Robert could then chime in with his side of the story.

I have no stake in this in any way. However, I am sick and tired of watching people make accusations and bashing people and vendors on this site, causing good people and good vendors to leave. Either post up or shut up, please cuz we are all sick of these accusations. Respectfully......

 

[Dave T(BADVENM)]

Edited - Please contact TMC to resolve, and/or contact admin's first.

Thanks
RedSrt007

Strange, I bought a set of American Eagle wheels from him and had NO problem whatsoever. Have you talked with him about the problem at hand prior to your post?

 

[amtrucker22]

Edited - Please contact TMC to resolve, and/or contact admin's first.

Thanks
RedSrt007

You are going about this all wrong. Don't know the story, but this is wrong...

 

[SilvrSRT10]

And you didn't need to post this on every single one of his threads.

 

[Brat]

You are going about this all wrong. Don't know the story, but this is wrong...

I agree with you.its wrong.

 

[sleeper]

I think hes a little bit pissed.

 

[VNM PWRD]

You are going about this all wrong. Don't know the story, but this is wrong...

:dito::dito::dito::dito::dito::dito::dito::dito::dito: