Forged Pistons & Rods

[HV SRT]

I have oliver billet rods & diamond pistons on order with JMB Justin. I'm going with a 8 psi pulley on a ROE SC. I will be pulling the motor for the install. I would recommend upgrading the rods. Everyone I talked to told me the rods are the weak link in our motors. Appox. price for rods & pistons is $3500 . Not cheap but worth it. Damn Viper tax.

 

[JTS VENOM PERFORMANCE]

I have oliver billet rods & diamond pistons on order with JMB Justin. I'm going with a 8 psi pulley on a ROE SC. I will be pulling the motor for the install. I would recommend upgrading the rods. Everyone I talked to told me the rods are the weak link in our motors. Appox. price for rods & pistons is $3500 . Not cheap but worth it. Damn Viper tax.

Ya'll fellas realy need to consider billet mains also, these long ass 10 cylinder cranks to a ton of flexing at high rpm especially the boosted motors,

 

[SrtBrad]

Ya'll fellas realy need to consider billet mains also, these long ass 10 cylinder cranks to a ton of flexing at high rpm especially the boosted motors,

Do you have a link for the billet mains?

 

[Bone]

you'll have to pm not a hemi, he is the one that told me about the carillos, or you cant contact them straight forward and ask them:dontknow:

Already done that (Nathen and Carrillo)....why I am asking you.

The company gave me a contact, for some reason in Austraila, they were 400/rod.

 

[Muzzy]

Does any know the big end bore diameter, center to center length, and big end width? I do not see these values on the spec sheet. Most aftermarket SBC rods have a pin bore diameter of .927. I am sure you can get pistons with the correct pin diameter for that bore. Or the larger BBC .990. If I have the specs that I requested, I might be able to track down a set of rods for a reasonable price. I am sure a set of rods for $2000 does not come with the Vaseline.

Thanks
-Muzzy

 

[not a hemi]

doneo has the carillo rods and the mahle pistons which are drop in, i have been trying to come up with a kit , but have been busy , so if you really want info faster than i can get it call gary as he has already done this (bone)
nathan

 

[Bone]

Already requested from him a couple of weeks ago, thanks.