FRONT FASCIA RUBBER SCRUBBER

[JTS VENOM PERFORMANCE]

yeah i know goofy title but its late


but this is a thick rubber for the front fascia, that should protect your front bumper from most minor scraps, and enhance the appearance also.

it will come with 15 self tapping screws and washers, and enough trim to do your front bumper.

these are pics from Profs truck, and he gave me good reviews on it so far, so maybe he will chime in, it also goes well with Justins front fascia saver.

price is $40 shipped

 

[Venom Power]

NEED.... CARBON.... FIBER..... NOT.....RUBBER...!

 

[Prof]

This was a very easy install and it looks very good.

Most of us have some minor rash on the bottom of the facia edge. This mod covers it and provides some additional protection.

I also have the JMB skid plate and that made the install very, very easy. I did not have to do anything other than loosen the existing screws that hold the skid plate slip the lip of the rubber molding between the front facia and the skid plate and re-tighten the screws. I only used four of Stinkers screws to make sure that the rubber molding had some screws penetrating the rubber in case the skid plate screws come loose.

Looks very nice, five to ten minutes to install and the added benefit is that the front end really looks slammed due to the additional overhang.

Cheap good looking mod that has several purposes.

Any of you that have Justin's skid plate will want this to finish the front end perfectly!

 

[blackviper]

Is the rubber reinforced with metal? What prevents it from flopping in the wind?

 

[Prof]

Is the rubber reinforced with metal? What prevents it from flopping in the wind?

The part that protrudes from under the lip is fairly thick and I doubt that at my normal speeds (less than 37 mph) it moves at all...

 

[ZCx]

37 m.p.h. ???????????

 

[Prof]

I'm really, really old.

It may be one of the reasons that my truck is a 14 second truck...:dontknow: :dontknow: :dontknow:

 

[JTS VENOM PERFORMANCE]

I have the actuall foam on my challenger, it doesnt flop, this is actuall hard rubber, or thick rubber, but i have hit the nose of the challenger a couple times, and no scarringyet

 

[SpudRacer]

:needpics: And I can't seem to find a skid plate at JMB's site... can someone please post a link? Much appreciated.

Tom

 

[FATJACK]

Is it available with neon???

 

[attila]

so you can turn it on when opening the doors, just like a fridge?

 

[JTS VENOM PERFORMANCE]

Its HD material , so no it dont flop around, and yes the light stays on

so IRONHEAD , let me know how you like yours buddy:marchmellow: :marchmellow: :marchmellow:

 

[VIPER]

is this still available ?

 

[JTS VENOM PERFORMANCE]

is this still available ?

well hell yeah, actually got to replace the one on the challenger from the first foam style to this tougher rubber stuff, the foam didnt hold up too well on the chally

 

[Black1]

Real good idea, Stink.... It looks really great from the pictures. :rock: :rock: :rock:

 

[JTS VENOM PERFORMANCE]

Real good idea, Stink.... It looks really great from the pictures. :rock: :rock: :rock:

Thanks bud, its something anyone can do, this way they jsut dont have to go shopping
plus it includes the stainless bolts and washers with it, so no rusty

 

[Ironhead]

i will have mine on shortly and post a pic or two ,,just been busy

 

[JTS VENOM PERFORMANCE]

i will have mine on shortly and post a pic or two ,,just been busy

cant imagine with what

 

[05QCSRT10]

Are these available in carbon fiber yet?

 

[FerrariTruck]

just got mine today and it went very easy and looks very good. Big thanks to tony for also getting me jtsvp sticker in RED.:rock: I will have pics on tomarrow.:congrats:



Oh and to the people who want in carbonfiber, be realistic.

If you did put it on it wouldnt be long before you break it off.

to top it off, only a few folks would even buy it if he did make it