neone know of a quick and non messy way to drain the fuel out of the trucks got to get the tank down to a 1/4 of a tank to get in show wed let me know if ya got ne ideas
Da1Chief said:Drive the heck out of it around a VERY CLEAN block until the tank reads 1/4...![]()
JTS VENOM PERFORMANCE said:not really too good a way bro, without removing the tank, sorry bud![]()
want work it has a rollover ball in it bud05dodgesrt10 said:well that blows guess ill try to do the old fasion garden hose in the tank lol
but it only stays on for a sec or two, but i guess he could bypass the pump switchZCx said:maybe a bleeder hose off the fuel rail or disconnect the supply line at the fuel rail & turn the key on ??????
how much fuel ya got on board ?????
JTS VENOM PERFORMANCE said:but it only stays on for a sec or two, but i guess he could bypass the pump switch![]()
ZCx said:do it with a hose off the fuel rail, like in taken a pressure readin, & let her idle????
FerrariTruck said:remove shrader valve on rail and attach a clear hose. You can buy at homedepot or black low psi fuel hose at autoparts. Then just jump the fuel pump relay.
This is the way i've done at work when the fuel evacutator is in use..
actually they have one for sale at harbor freight for like 80 bucks. You crank the handle and suck it out.
ZCx said:depends what the gallons per hour, gph, our pumps are rated.
still take a bit to pump 19.5+ gal. out of her![]()
![]()
05dodgesrt10 said:how would you jump the relay by turning key on and off
FerrariTruck said:you remove the relay for the fuel pump control and use a 14-16 guage wire and connect terminal 30 to 87
JTS VENOM PERFORMANCE said:jsut be very careful chris![]()