Got 12.9 in the heat Finally!

[Fahrenheit]

SO now you broke the linkage, are you gonna make it out Sunday?

 

[Tooloe]

SO now you broke the linkage, are you gonna make it out Sunday?

thats his ricer excuse



good times man!

 

[OSO]

SO now you broke the linkage, are you gonna make it out Sunday?

Yep, i will have it fixed as soon as i get it up in the air.

thats his ricer excuse



good times man!

Excuse my ass 12.8 this Sunday:rock:

Oh that 12.9 run was with the spare 22 jack and tools in the bed Hell with it im gong for 12.7:marchmellow:

 

[moparracing]

those are good numbers, for a hemi..... gettin' close to my 12.7, i'm gonna have to lose some weigh.

 

[OSO]

those are good numbers, for a hemi..... gettin' close to my 12.7, i'm gonna have to lose some weigh.

Thanks , its not bad for only 8 Well it ran 12.8 last winter with the trans failing so if im hittin 12.9 in the heat now, I got my fingers crossed for some 12.5 passes when i get the tune corrected. :rock:

I will be pulling the stock heads off in about 2 weeks going with some big valve heads and a new cam for some more bottom end T/Q. Will also be porting and polishing the intake hope it helps:dontknow:

Ultimate goal is 11s N/A in street trim but if i have to use Drag radial i wont cry about it

 

[Ironhead]

was that you calling last night ,,i left phone in truck ,,,did not see it till 9pm ,,

 

[moparracing]

Thanks , its not bad for only 8 Well it ran 12.8 last winter with the trans failing so if im hittin 12.9 in the heat now, I got my fingers crossed for some 12.5 passes when i get the tune corrected. :rock:

I will be pulling the stock heads off in about 2 weeks going with some big valve heads and a new cam for some more bottom end T/Q. Will also be porting and polishing the intake hope it helps:dontknow:

Ultimate goal is 11s N/A in street trim but if i have to use Drag radial i wont cry about it

so how much money ya got into this truck so far (new motor,...) ? :dontknow:

 

[Ironhead]

so how much money ya got into this truck so far (new motor,...) ? :dontknow:

new motor 5 trannys lol

 

[moparracing]

new motor 5 trannys lol

curious if he could of just bought an srt-10 for less than he's invested in a hemi to run where stock srt-10's already run ?? :dontknow:

srt-10's are in the $20k range these days.....

 

[Ironhead]

he could have bought two ,,this is a no shitter either ,,,but to ol leadfoot its a personal thing ,,he shot that elephant,and he is going to eat it one bite at a time

 

[moparracing]

he could have bought two ,,this is a no shitter either ,,,but to ol leadfoot its a personal thing ,,he shot that elephant,and he is going to eat it one bite at a time

now dat is too funny.......

 

[TNVIPER]

those are good numbers, for a hemi..... gettin' close to my 12.7, i'm gonna have to lose some weigh.

Takes the bottle for a Hemi to see 12s...the 10 does it on it's own..

 

[Ironhead]

well i have seen OSO truck do high 12,s in person and he aint got no bottle

 

[OSO]

he could have bought two ,,this is a no shitter either ,,,but to ol leadfoot its a personal thing ,,he shot that elephant,and he is going to eat it one bite at a time

Yep it was me,

I dont think it could of been said any better than that.

If i would of known how much i was going to spend i wouldn't of done it.

If i would of put a manual in the truck or used a more efficient trans it there would already be low 12s. Its making 400 rwhp through a 727 non lockup with a gear vendors O/D. Maybey next time:dontknow:

 

[Venom Power]

Excellent run.. If I hadn't accidentally hit myself in the face with a mallet yesterday rolleyes:don't ask!), I would have been there at the track with you too...

 

[OSO]

Oh yeah don't forget all my 12 second runs are N/A on street tires.:marchmellow:

Excellent run.. If I hadn't accidentally hit myself in the face with a mallet yesterday rolleyes:don't ask!), I would have been there at the track with you too...

PICS?

 

[TNVIPER]

Oh yeah don't forget all my 12 second runs are N/A on street tires.:marchmellow:

I thought you said you had the bottle in another post....what are your mods, I have forgotten?..

 

[OSO]

I thought you said you had the bottle in another post....what are your mods, I have forgotten?..

No bottles wanted to go F/I but 11.1 comp. Might as well build another motor.

Mods
It's a 6.1 based 392 stroker with CP Pistons 11:1 CR, steel gas nitride top rings, napier second, used nascar takeout Carrillo rods, 3.795 stroke honda journal crank. 218/226 duration 113 LSA cam 0.566/0.556 lift. Stock valve cnc ported heads. Trans is a 727 with a gear vendors over drive. Dana 60 rear with 4.56.

 

[moparracing]

Yep it was me,

I dont think it could of been said any better than that.

If i would of known how much i was going to spend i wouldn't of done it.

If i would of put a manual in the truck or used a more efficient trans it there would already be low 12s. Its making 400 rwhp through a 727 non lockup with a gear vendors O/D. Maybey next time:dontknow:

"sounds" like ALOT more money & it's still a hemi.

 

[OSO]

"sounds" like ALOT more money & it's still a hemi.

I know but have you seen this

http://videos.streetfire.net/video/Stock-Srt-10-QC-Vs-Na-Reg_687638.htm
http://videos.streetfire.net/video/SRT10-VS-Hemi_493657.htm