Has anyone had a problem with surging Cruise control after putting a Roe SC on. I love the SC but cant seem to find the Surging problem have adjusted everything and reset the PCM. Runs about 19HG Vac at the Servo control.
Thanks
Thanks
That is the surge I get with mine too.LoveThisTruck said:What do you mean by "surge"?
If you mean you can feel it accelerate a little every few seconds??? then ya it drives me freakin nuts
wyoramsrt-10 said:That is the surge I get with mine too.
eddie102870 said:it surges, mine has done it since i installed it. i get better fuel economy with it off. its not as bad on flat ground but in rolling hills it tends to surge i assume b/c it goes from vacuum to boost so quick.
Marc T said:I thought I was the only one with this problem!
Mine does it and It drives me nuts to the point where I don't use it! I thought it may have been from putting in the 4:88's making the acceleration a little more pronounced. I guess I am not alone here!!
Marc T said:I thought I was the only one with this problem! I guess I am not alone here!!
msdnga said:Sean can dial that out with the SCT Tuner he sells.
BigRed460 said:I have this problem and I dont have roe... I just figured the speed sensor is dirty
BigRed460 said:The top of the diff. (yea I spelled it as far as I could and put a .). The only reason I say this is that my hemi did the same the and i cleaned it and it was good after that. I'll try this weekend on the 10 and see if it fixes it.