HELP!

[MUTT]

Finally got my truck all back together. Now my Oil Temp guage is not working. Took the pillar trim back off and made sure i plugged it in. Yup... all of the other guages are working fine. Went through the fuses didnt see one blown. Where is the sending unit plugged in at? whats the fuse number? any help would be great. T.I.A. :dontknow:

 

[TheMoparConnection]

its fuse#28 in your IPM. if fuse is good check that you have power and ground going to the connector. (key must be on when checking)

CAV CIRCUIT FUNCTION
1 E10 20OR/DG ENGINE OIL TEMPERATURE GAUGE ILLUMINATION DRIVER
2 G127 20VT/DB OIL TEMPERATURE GAUGE SIGNAL
3 F21 20PK/DG FUSED IGNITION SWITCH OUTPUT (RUN-START)
4 Z1 18BK GROUND

 

[MUTT]

ok,fuse is good, assuming i have power cause it's the same fuse that controls the overhead console. Where is the sender unit connected at? i unplugged a bunch of stuff under the hood when i was installing all of the new powder coated pieces, was wondering if i forgot one. i checked as best i could that everything was plugged in. If it is under the hood and not plugged in, its not right on top and obvious. I will do a double check tomorrow after work for power to the connector. thanks for the help

 

[Roz]

ok,fuse is good, assuming i have power cause it's the same fuse that controls the overhead console. Where is the sender unit connected at? i unplugged a bunch of stuff under the hood when i was installing all of the new powder coated pieces, was wondering if i forgot one. i checked as best i could that everything was plugged in. If it is under the hood and not plugged in, its not right on top and obvious. I will do a double check tomorrow after work for power to the connector. thanks for the help

I'm guessing the sending unit is on the pan somewhere. . . Or maybe the head . . . Wouldn't know which one though. . .

 

[MUTT]

so basically, heads or tails??

 

[Roz]

so basically, heads or tails??

Pretty much. I haven't learned the ins and outs of this truck yet. . . I'm learning everyday!

Good luck my friend. . .

 

[MUTT]

you still needing leather?

 

[Roz]

Yeah! I'd love some.

Does this help? http://www.paxtonauto.com/pdf/manuals/4809645.pdf

Scroll down to page 13.

 

[MUTT]

thanks for the info...i forgot, kenny gave me a copy of the manual...DUH....i will bring some pieces and see if any of it will help you

 

[Roz]

thanks for the info...i forgot, kenny gave me a copy of the manual...DUH....i will bring some pieces and see if any of it will help you

No problem! :rock:

You da man! :dancing:

 

[01VIPERGTS/ACR]

No problem! :rock:

You da man! :dancing:

REMEMBER ROZ...ME AND THAT AVATAR OF YOUR THIS SUNDAY.:rock:

 

[Roz]

REMEMBER ROZ...ME AND THAT AVATAR OF YOUR THIS SUNDAY.:rock:

SIIHP.