Justanotherdodge
Full Access Member
that's what I was going for.Misterhemi03 said:
Here's a photoshop...
- Thread starter Justanotherdodge
- Start date
Hotrodmike
Full Access Member
I like the 4 pipe better than stock and agree ,maybe Mopar shoulda . The way that one was would not be hard if you had a spare wasted bumper cover as you could cut and paste . You are correct on the other bumper mod but I think I would just do a alum or steel cover and be done . We do drop down plates for Rods and they come in elect and pnuematic . I came up with a hide away that used engine vac to drop the light but figured the cops would hate it since when u floored it the damn thing would retract . The worst thing would be the tailgate you took the bed rail out which kinda would killl opening it ,,unless you did a full lenght pocket for the bed rail (since it is support ) and have the edge roll into the pocket .
Have A Kind Day
Mike
. The way that one was would not be hard if you had a spare wasted bumper cover as you could cut and paste . You are correct on the other bumper mod but I think I would just do a alum or steel cover and be done . We do drop down plates for Rods and they come in elect and pnuematic . I came up with a hide away that used engine vac to drop the light but figured the cops would hate it since when u floored it the damn thing would retract . The worst thing would be the tailgate you took the bed rail out which kinda would killl opening it ,,unless you did a full lenght pocket for the bed rail (since it is support ) and have the edge roll into the pocket .Have A Kind Day
Mike
I have been thinking about this mod alot. So much that I am considering pricing it out. I am fairly certain I can fiberglass the cut out to match the stock. I am thinking that the resin will adhere to the stock bumper if I strip it down.
My goal is to take a look at how to remove the cover so I can get it on my work bench. Then I will make a mold of the exit point. Then I can cast the exit built up piece.
Once I like it (and have the money to pay for the paint job-damn divorce), i will glass it onto the cover and remove the exit window. I will post pictures of my progress .
My goal is to take a look at how to remove the cover so I can get it on my work bench. Then I will make a mold of the exit point. Then I can cast the exit built up piece.
Once I like it (and have the money to pay for the paint job-damn divorce), i will glass it onto the cover and remove the exit window. I will post pictures of my progress .
Justanotherdodge said:...that I messed with for about 1hr today and I've come to the conclusion that I MUST HAVE THIS LOOK! it'll take alot of work but it can be done:rock:
It's also my new desktop. Enjoy!
are you doing it?
When I get the time to remove the cover, i will try to make the mold.
streetwedg
Full Access Member
i have a messed up bumper cover that i saved just for this mod.can we run daul exaust and still keep the spare
i will try to finaly get pics of truck up tomorow
i will try to finaly get pics of truck up tomorow
My local exhaust shop says they can get the tailpipe around the spare on both sides.
Support Us
Become A Supporting Member Today!
