horrible day at the dyno!!!

faslane505

faslane505

Full Access Member
Joined
Dec 15, 2006
Messages
2,162
Reaction score
0
Location
Houston
so had the truck dyno'd today...wow!!! horrible #'s, granted its on a mustang dyno and those are know to be 15-18% off compaired to a dynojet... i recently installed stage 4 ported heads...comp cam (specs are below),and crower 1.7 shaft rockers.. i also have bassani's, Xmetal TB, catless, mopar perf comp....

446rwtq
441rwhp

any thoughts?

dont flip out when you see my AFR on the max power column....when you got out of the throwttle it spiked...i think at the max hp and tq my afr was around 12.5

im hoping its jsut a tuning issue....i am ordering the sct tuner this week
well i was gonna post the dyno sheet but i guess the site is have tech problems..cause it wont let my press the attachment button...ill post when i can
 
im sure you will get it figured out .........wish i coukld be of more help but i just dont know.....sorry and good luck
 
Drive her down to the coast, fine a shop with a Dyno-Jet and pull a good number....you need that wet-air at the coast. :nurse:

Quick
 
im in houston....it doesnt get more humid than that brotha!!!!

i hope its a tuning issue....otherwise that about $11000 BUCKS ON JUST ABOUT NOTHING...EXCEPT A TRUCK THAT RUNS, NOW!
 
Bro you may just need to tune it.

There are a few viper shops here in town. cant think of the names. I think RSI went to DFW
 
faslane505 said:
so had the truck dyno'd today...wow!!! horrible #'s, granted its on a mustang dyno and those are know to be 15-18% off compaired to a dynojet... i recently installed stage 4 ported heads...comp cam (specs are below),and crower 1.7 shaft rockers.. i also have bassani's, Xmetal TB, catless, mopar perf comp....

446rwtq
441rwhp

any thoughts?

dont flip out when you see my AFR on the max power column....when you got out of the throwttle it spiked...i think at the max hp and tq my afr was around 12.5

im hoping its jsut a tuning issue....i am ordering the sct tuner this week
well i was gonna post the dyno sheet but i guess the site is have tech problems..cause it wont let my press the attachment button...ill post when i can
Click to expand...

Are you using the stock lifters?
 
there is something wrong. i have an 04 rc and it made a tad more HP/TQ and its 100% stock down to the windeshield washer fluid. id get it checked out.
 
wheredwhogo? said:
there is something wrong. i have an 04 rc and it made a tad more HP/TQ and its 100% stock down to the windeshield washer fluid. id get it checked out.
Click to expand...


on a mustang dyno>??


a mustang dyno is normally about 15% below conventional dynos....so if i were to do it on a dynojet...id be making about 50-65 more rwhp...still the numbers are still way low for the mods i have....i cant remember who it was but i iknow another member had almost identical mods to me and made around 540+rwhp and a shit load of torque... im hoping one of the member s here can maybe shead some light on possible problems
 
The dyno sheet does not indicate if the numbers are corrected or raw.

This needs to be determined befpre anything can be determined.
 
FSTJACK said:
The dyno sheet does not indicate if the numbers are corrected or raw.

This needs to be determined befpre anything can be determined.
Click to expand...



#'s are corrected Jack
 
PSI tuned a viper w/ heads and cam and they came out with almost 600rwhp, you might give Blaine or Patrick a call and see what they can do...
 
QuickSilver said:
Drive her down to the coast, fine a shop with a Dyno-Jet and pull a good number....you need that wet-air at the coast. :nurse:

Quick
Click to expand...
If we drive any closer to the water we will need a viper powered boat...
 
BigRed460 said:
PSI tuned a viper w/ heads and cam and they came out with almost 600rwhp, you might give Blaine or Patrick a call and see what they can do...
Click to expand...


can you forward me their # red


thanks
 
faslane505 said:
......still the numbers are still way low for the mods i have....i cant remember who it was but i iknow another member had almost identical mods to me and made around 540+rwhp and a shit load of torque...
Click to expand...
You might be referring to my old truck which made 535/567. The big difference in yours and mine is that mine was BUILT AND TUNED by Joe Donovan.

My cam selection was perfect for my mods and my heads, throttle body and intake runners were HAND PORTED to exact spec's by Joe.

Your heads/cam, intake and exhaust all have to be properly mated to compliment each other and work in unison. The engine must then be properly tuned.

You can do the exact same TYPE of mods as me but with a different head porter, different tuner or different cam selection you won't get the same results.

What were the full specs of the cam that you used? I know there is a certain point on these motors where you can go too big and lose power/torque.
 
drive to Coco Beach and let Marty do some custom dyno tuning using the SCT programmer. I don't think you should go with the generic tune on an SCT...you need to tune for the mods you've done. He netted me 40 ft lbs of torque on motor for my street tune VS the stock computer.
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

image
1
DSCF3084
IMG 1551
Back
Top