how loud will these be?

Loud just loud....but not as loud (rapping) as a AeroTurbine, i'd like to hear your truck with 2 Aero's.
 
AWDisuzu said:
you have a honda civic you haven't told us about?
Click to expand...

Burns does a lot for Porsche tuners....why a civic....the muffler cost more than an entire isuzu?
 
Texas Yellow Fever said:
They do good stuff, I had them make a set of sidepipes for my '64 Vette, I was more than pleased.
Click to expand...


so here is the deal....my truck is blowing the B&B muffler apart....damn stock manifolds are just flowing toooo much...:D ....want to cut out the $1300 muffler and weld in these 30" chambered muffs....will be a 15 minute job as the B&B is 28" long with a few inches of pipe on each side....

what do ya' think boss too loud...????
 
You may want to talk to Gary at B&B he might have something for you. He can do alot of fabrication. Maybe just send him the muffler and he can fab the rest so it matches the rest of the system. He made some Sweet midpipes for me....

Heres their # ask for Gary 1-888-598-3688
 
Dominick572 said:
You may want to talk to Gary at B&B he might have something for you. He can do alot of fabrication. Maybe just send him the muffler and he can fab the rest so it matches the rest of the system. He made some Sweet midpipes for me....

Heres their # ask for Gary 1-888-598-3688
Click to expand...

talked to B&B...their mufflers and parts ARE NOT DESIGNED FOR RACING APPLICATIONS....RACE FUEL ALONE VOIDS THE WARRANTY....:dontknow: :dontknow: ..man I just called to see if they could design something for me on my dime and they went all "legal disclaimer" on me...for a $1300 cat back...kinda expected it to be up to some racing or at least be a straight through design....just not willing to drop another 1k plus...their product looks great....sounds great....fits great....but the flow isn't there....
 
Nowwhat said:
so here is the deal....my truck is blowing the B&B muffler apart....damn stock manifolds are just flowing toooo much...:D ....want to cut out the $1300 muffler and weld in these 30" chambered muffs....will be a 15 minute job as the B&B is 28" long with a few inches of pipe on each side....

what do ya' think boss too loud...????
Click to expand...

No, I think you'd be OK from a loudness standpoint.
 
Nowwhat said:
....damn stock manifolds are just flowing toooo much
Click to expand...

:rofl: :rofl: :rofl: :puke: :puke: :puke: :laugh: :laugh: :laugh: :bootyshake: :bootyshake: :bootyshake:

Yep, that about covers it.;) :D
 
Silverback said:
:rofl: :rofl: :rofl: :puke: :puke: :puke: :laugh: :laugh: :laugh: :bootyshake: :bootyshake: :bootyshake:

Yep, that about covers it.;) :D
Click to expand...


what about the chambereds....?.....thoughts...
 
All the more reason :D

If noise is the problem, slap on some straight-pipe resonators, kind of like what comes stock :dontknow:
 
Mike,

What do you mean by blowing the muffler apart??:confused:

Just curious since I am running the B&B setup also!! Howerver I only have a smiggin of the ponies you do!!:p
 
Marc T said:
Mike,

What do you mean by blowing the muffler apart??:confused:

Just curious since I am running the B&B setup also!! Howerver I only have a smiggin of the ponies you do!!:p
Click to expand...

I am not blaming B&B mind you...kinda disappointed but I am running a lot of nitrous....

the B&B is not a straight through design....thought it was....there is perrforated steel mesh in the muffler and it is tearing...more to the point the flow is not keeping up and I blew out the gaskets where the muffler meets the mids...
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

mods 2.4 001
IMG 0327
IMAG2462
20140726 134105
Back
Top