How low are you?

[John02SS]

I'm thinking about playing with the ride height on my 10 and wanted to see what some other trucks sit like. Lets get some measurements from all the lowering kits and measurements from stock RC and QC so we can see an average of where we start from. I'll start so we can document it. Measurement from center of fender to ground.

1. 2005 RC, Stinker's 1/2, stock tire height, 33.25 front - 34.5 rear

 

[WAZZSUP]

It's snowing outside so I can't back it out to measure....go buy a six pack and measure against this picture

 

[Prof]

It's snowing outside so I can't back it out to measure....go buy a six pack and measure against this picture

Bullshit! If you are buying Corona, get a case or don't waste your time!

 

[Begood]

Bullshit! If you are buying Corona, get a case or don't waste your time!

Good call Roy.

Bill.

 

[WAZZSUP]

...................I stand corrected and am ashamed. If only business was better

 

[jbilledeaux]

34.5 Front factory and 34.5 rear Stinkers blocks:rock:

 

[Roz]

Stinker's front springs:
F = 32-3/4"

2.75 blocks:
R = 33"

 

[QuickSilver]

Quick

 

[moparracing]

front = 33" with 2" drop springs, rear = 33.5" with a 3" spring de-arch....

 

[Prof]

OK...where is the center of the fender?

 

[moparracing]

OK...where is the center of the fender?

i just ran the tape measure thru the center cap of the rim......

 

[Prof]

Sorry, that just confused me...not a difficult thing to do.

 

[John02SS]

Moparracing is on the money. Up the center cap to the fender.

Quicksilver, truck looks GREAT! What setup are you running and what does it measure out?

 

[Prof]

Oh! That helps...I'll check tomorrow...got to get it off the jack stands.

 

[Carlwalski]

34-1/4" up the front and 34-1/2" out in the rear with the 45 series sidewalls filling the rest of the wells in nicely.
Anything is better than stock. Mine looked like a monster truck before Stinkers drop kit. :laugh: This is the only decent photo I have of it for now.


Cheers,
Carlwalski
THE BATRAM


BEFORE

AFTER

 

[jbilledeaux]

34-1/4" up the front and 34-1/2" out in the rear with the 45 series sidewalls filling the rest of the wells in nicely.
Anything is better than stock. Mine looked like a monster truck before Stinkers drop kit. :laugh: This is the only decent photo I have of it for now.


Cheers,
Carlwalski
THE BATRAM


BEFORE

AFTER

I agree, I look at my truck now compared to how it was and it's a big difference. I always knew 2" would complete me

 

[QuickSilver]

Moparracing is on the money. Up the center cap to the fender.

Quicksilver, truck looks GREAT! What setup are you running and what does it measure out?

I'll measure tomorrow :marchmellow:
set-up: X-Metal front springs
2"/X-Metal lowering blocks w/viper logo in red
Plus around town I run the back tires 8#'s low, should be at 38#'s.
Makes that tire a little fatter, if you know what I mean.......

Quick

 

[amtrucker22]

Hey John,

My QC is 32 1/4 up front and 34 1/4 in the rear. This is with Stinkers drop kit. You may be familiar with it since you put it on

 

[Big Worm]

I will have some picture up for you tomorrow it has been shitty the past couple of days.

 

[QuickSilver]

............. and the tale-of-the-tape :slug:

32-1/2"........front
33"..............rear

Quick