I need the 2 rear studs for a wing

[Blaine@PSI]

I threw mine away and now need them again. someone who has de-winged theirs please let me have them. thanks

 

[Begood]

Did you try ordering them from a dealer, they can't cost much.

Bill.

 

[Bone]

The only Rear Stud I know of is Mikey....not first hand of course.

 

[ViperTruck2933]

The only Rear Stud I know of is Mikey....not first hand of course.

 

[Blaine@PSI]

Did you try ordering them from a dealer, they can't cost much.

Bill.

dealer will not sell them as they are a non-servicable part.




come on guys i am in a bind here. help only if you can.

 

[Begood]

Try PMing Dragon here, he can probably help.

Bill.

 

[mopower1958]

Wifey may have a couple of sets.

 

[TheMoparConnection]

do you need the screws that tighten the spoiler down...goes into the spoiler right?

 

[Wifey]

Wifey may have a couple of sets.

No, I was jipped :dontknow:

 

[Blaine@PSI]

do you need the screws that tighten the spoiler down...goes into the spoiler right?

no i have those i need the two cammed studs that bolted to the bed right above the tail lights.

 

[Silverback]

no i have those i need the two cammed studs that bolted to the bed right above the tail lights.

If no one can help you here, you might try going to a bolt store. Not Home Depot, but a business that deals only in bolt and such.

I did a quick Google on "Bolts" and looked at a few places and didn't find them. However I really don't have the time at this moment to look. Give it a try and see what you can find.

 

[Silverback]

I knew I had seen these before. They appear to be the same as the lock screws we use for drill motors.

Hopefully the link below works.


http://www.allamericanproducts.com/bush/lockscru.htm#drill bushings

 

[Silverback]

This is what it looks like if I remember right.

 

[TheSickness]

I nominate this thread for....Title of the year so far Dude that is funny

 

[Blaine@PSI]

had to do something to get some attention.

 

[TheSickness]

had to do something to get some attention.

Instant classic for sure bro :burnout:

 

[Blaine@PSI]

so you guys can go ahead and whore this up. i am going to make my own on the lathe.......but i still need two studs in the rear......:dontknow: :star: :dancing:

 

[TheSickness]

so you guys can go ahead and whore this up. i am going to make my own on the lathe.......but i still need two studs in the rear......:dontknow: :star: :dancing:

Well your outta luck with this group.........They are all bottoms

 

[Bone]

Well your outta luck with this group.........They are all bottoms

Speak for yourself! LOL

Try Art Kendrick and Henson Motors in Texas.

 

[Silverback]

so you guys can go ahead and whore this up. i am going to make my own on the lathe.......but i still need two studs in the rear......:dontknow: :star: :dancing:

Didn't know I whored it up.