TheMoparConnection
Full Access Member
- Joined
- Jun 9, 2006
- Messages
- 3,978
- Reaction score
- 3
Paul I'm very Sorry to see this. Hope all is well
Items for Sale
- Thread starter amtrucker22
- Start date
amtrucker22
Active Member
Hey Robert... It is just priorities... I would like to be debt free + I would like my wife to be able to quit her job and take care of our children. Selling the truck makes all this possible (even though she is the bread winner).
Thanks for asking, I appreciate it.
Thanks for asking, I appreciate it.
amtrucker22
Active Member
These are a direct fit.
I have answered all PM's and am waiting on replies. I will update the list shortly.
I have answered all PM's and am waiting on replies. I will update the list shortly.
amtrucker22
Active Member
Sold-Brake Pedal (new never used)
Sold-Wrinkle Black battery tray box
Sold-Fascia saver
Sold-Custom helper airbag setup for lowered RC.
Sold-Push to start fangs button
Sold-JMB engine dress up kit (radiator and fuse box covers) - $45 (radiator piece has one small nick)
couple of inquiries-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125
-Venom wires and separators (new never used) - $115
These items are pickup only and can be picked up at the PCB GTG.
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock trade
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
couple of inquiries-Mopar Fiberglass bed cover with a wing that has been cut to size - $500
couple of inquiries-Fox box for 10's (kickers NOT included) - $90
Lots of inquiries-Drag Radials - $450
Sold-Wrinkle Black battery tray box
Sold-Fascia saver
Sold-Custom helper airbag setup for lowered RC.
Sold-Push to start fangs button
Sold-JMB engine dress up kit (radiator and fuse box covers) - $45 (radiator piece has one small nick)
couple of inquiries-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125
-Venom wires and separators (new never used) - $115
These items are pickup only and can be picked up at the PCB GTG.
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock trade
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
couple of inquiries-Mopar Fiberglass bed cover with a wing that has been cut to size - $500
couple of inquiries-Fox box for 10's (kickers NOT included) - $90
Lots of inquiries-Drag Radials - $450
Last edited:
amtrucker22
Active Member
All PM's answered. ALOT of inquiries on the drag radials but no commitments from someone that is close.
amtrucker22
Active Member
For all the people asking about tread here are the pictures. I am not very knowledgeable on DR's but from my understanding these have quite a few more passes on them.
amtrucker22
Active Member
Oh, I know I know... They are dirty 
amtrucker22
Active Member
Sold-Brake Pedal (new never used)
Sold-Wrinkle Black battery tray box
Sold-Fascia saver
Sold-Custom helper airbag setup for lowered RC.
Sold-Push to start fangs button
Sold-JMB engine dress up kit (radiator and fuse box covers) (radiator piece has one small nick)
Sold-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
PENDING-Mopar Fiberglass bed cover with a wing that has been cut to size
PENDING-Drag Radials
Whats Left
-Fox box for 10's (kickers NOT included) - $90 couple of inquiries
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125
-Venom wires and separators (new never used) - $115
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock trade
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
Sold-Wrinkle Black battery tray box
Sold-Fascia saver
Sold-Custom helper airbag setup for lowered RC.
Sold-Push to start fangs button
Sold-JMB engine dress up kit (radiator and fuse box covers) (radiator piece has one small nick)
Sold-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
PENDING-Mopar Fiberglass bed cover with a wing that has been cut to size
PENDING-Drag Radials
Whats Left
-Fox box for 10's (kickers NOT included) - $90 couple of inquiries
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125
-Venom wires and separators (new never used) - $115
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock trade
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
Last edited:
amtrucker22
Active Member
BUMP... Any offers on the remaining items? I can make a great deal on the headlights and tail lights!
OSO
Full Access Member
Let me know what you can do on the headlights only.
amtrucker22
Active Member
PM Sent
serjio007
Full Access Member
pm sent :rock:
amtrucker22
Active Member
Replied to all PM's
amtrucker22
Active Member
I think I have answered all PM's. If you are waiting to hear back from me on something please PM me again. Thanks!
Sold-Brake Pedal (new never used)
Sold-Wrinkle Black battery tray box
Sold-Fascia saver
Sold-Custom helper airbag setup for lowered RC.
Sold-Push to start fangs button
Sold-JMB engine dress up kit (radiator and fuse box covers) (radiator piece has one small nick)
Sold-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
PENDING-Mopar Fiberglass bed cover with a wing that has been cut to size
PENDING-Drag Radials
Whats Left
-Fox box for 10's (kickers NOT included) - $90 couple of inquiries
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125couple of inquiries
-Venom wires and separators (new never used) - $115
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock tradecouple of inquiries
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
Sold-Brake Pedal (new never used)
Sold-Wrinkle Black battery tray box
Sold-Fascia saver
Sold-Custom helper airbag setup for lowered RC.
Sold-Push to start fangs button
Sold-JMB engine dress up kit (radiator and fuse box covers) (radiator piece has one small nick)
Sold-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
PENDING-Mopar Fiberglass bed cover with a wing that has been cut to size
PENDING-Drag Radials
Whats Left
-Fox box for 10's (kickers NOT included) - $90 couple of inquiries
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125couple of inquiries
-Venom wires and separators (new never used) - $115
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock tradecouple of inquiries
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
amtrucker22
Active Member
Sold-Brake Pedal (new never used)
Sold-Wrinkle Black battery tray box
Sold-Fascia saver
Sold-Custom helper airbag setup for lowered RC.
Sold-Push to start fangs button
Sold-JMB engine dress up kit (radiator and fuse box covers) (radiator piece has one small nick)
Sold-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
Sold-Fox box for 10's (kickers NOT included) - $90
PENDING-Mopar Fiberglass bed cover with a wing that has been cut to size
PENDING-Drag Radials
Whats Left
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125couple of inquiries
-Venom wires and separators (new never used) - $115
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock tradecouple of inquiries
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
Sold-Wrinkle Black battery tray box
Sold-Fascia saver
Sold-Custom helper airbag setup for lowered RC.
Sold-Push to start fangs button
Sold-JMB engine dress up kit (radiator and fuse box covers) (radiator piece has one small nick)
Sold-JMB Cold Air Intake with catch can (I will include what tubing I have but you may have to pick up some from you local hardware store) $150
Sold-Fox box for 10's (kickers NOT included) - $90
PENDING-Mopar Fiberglass bed cover with a wing that has been cut to size
PENDING-Drag Radials
Whats Left
-Projector Headlights with HIDs. 3 of the LEDs under the headlights are burnt out. I just had them running every other light and it worked great. These just pop in and pop out so they are easy to replace. I am sure you can get new LEDs if you wanted to. HIDs ballasts are labeled ExtremeHIDs - $125couple of inquiries
-Venom wires and separators (new never used) - $115
-22" Boyd Coddington rims ($400 + trade of stock rims in good condition)
-Magnaflow exhaust & JMB Catless mids $400 + stock trade
-Recon LED smoked taillights & third brake light (these are not glossy but could be with a little buffing) - $100 + stock tradecouple of inquiries
-Caltrac traction bars (these are for a lowered QC) You would need to buy the bushings to go into the leaf spring - $150
Support Us
Become A Supporting Member Today!
