JMB Performance Billet Fuel Rails Pics

[JMB Justin]

Finished a couple sets of these last week:

Available for stock or aftermarket fuel injectors, $375 a set in powdercoated finish. -8 AN ORB inlets
Justin

 

[FATJACK]

Those look great Justin.:rock: :rock:

 

[TNVIPER]

Nice!!:rock: :rock:

 

[ZCx]

:dito: :dito: :dito: :dito:

do the polished ones come clear powder coated????

 

[JTS VENOM PERFORMANCE]

:rock: :rock: :rock: :rock: :rock:

 

[blackviper]

Justin can you make these with 10 AN inlets? I'm thinking about switching over to E85 eventually and will need 30% more fuel. By the way, awesome work.

 

[FastSRT19]

Those are sweet! Do they require anything else to be changed out? Fittings etc...? These are going on the top of my mod wish list!:rock:

 

[10banger]

Justin - as usual your work is perfect!

 

[cyalata]

hey bud put me down for a set im running the injectors that came with the roe and will need them in green u got my number jus call if ya got ne ?

 

[FerrariTruck]

justin, do any of these have specific port to tap for nx fuel supply?

 

[Midnight Runner]

Very nice.

 

[JMB Justin]

Thanks Guys!

:dito: :dito: :dito: :dito:

do the polished ones come clear powder coated????

Those are clear powdercoated, but thats up to the customer.

Justin can you make these with 10 AN inlets? I'm thinking about switching over to E85 eventually and will need 30% more fuel. By the way, awesome work.

-8 is plenty big for what your wanting to do, 1/2" fuel line (-8an) to each rail will support 1500+whp on E85. The rails are 11/16" ID as well

Those are sweet! Do they require anything else to be changed out? Fittings etc...? These are going on the top of my mod wish list!:rock:

I can make a kit up to use these with a stock fuel line, would be about $115 for the fitting kit (depends on fitting color/hose style).

hey bud put me down for a set im running the injectors that came with the roe and will need them in green u got my number jus call if ya got ne ?

Ill get going on a set for you, have 3 sets in the works right now. :rock:

justin, do any of these have specific port to tap for nx fuel supply?

As usual I can do something custom, not a problem

Justin

 

[MikeNice]

Awesome work!

 

[IH8CHVYS]

Awesome work Justin!..................O and Pops to!

 

[cyalata]

Good deal I will call u tomm and discuss it a lil more I will need a nut welding in the drivers side for fuel pressure sensor so hopefully it ain't to late

 

[blackviper]

Justin, I'm using a one -8 line going to a Y connector and then out to the fuel rails and a -6 retun line. Will that still support the horsepower you mentioned?

 

[JMB Justin]

Good deal I will call u tomm and discuss it a lil more I will need a nut welding in the drivers side for fuel pressure sensor so hopefully it ain't to late

Not a problem, TTY tomorrow

Justin, I'm using a one -8 line going to a Y connector and then out to the fuel rails and a -6 retun line. Will that still support the horsepower you mentioned?

Depends on how much power the truck makes, I think you would be ok with ~800whp on E85 (blower only), but its somewhat uncharted waters. I feel confident in your existing fuel system supporting 1100whp with forced induction on gasoline, and ~30% loss will be just shy of 800whp.

Justin

 

[Venom Power]

So after I wiped off the drool from my shaven chin, I wondered if these come high polished under clear coat. A custom design for NoS would be outstanding and something I'd want, no doubt.

 

[blackviper]

Justin, I will be definitely calling you for a third pump.

 

[JMB Justin]

So after I wiped off the drool from my shaven chin, I wondered if these come high polished under clear coat. A custom design for NoS would be outstanding and something I'd want, no doubt.

The pics show a polished with clear powdercoat version. I can add a port for nitrous/fuel pressure guage, etc. no problem.

Justin