Lowered RC guys

[Nowwhat]

with a 2" block in the back....what is the space in inches between the top of the rear tire and the bottom of the fender ???

what is the space on a non lowered RC

thanks.....

 

[TheMoparConnection]

WHY?......

 

[Nowwhat]

WHY?......

my new axle has the leaf mounts on the bottom like a RC....need to get the height right....

 

[Dave T(BADVENM)]

with a 2" block in the back....what is the space in inches between the top of the rear tire and the bottom of the fender ???

what is the space on a non lowered RC

thanks.....

Just measured about 3 3/4 inches with the lowering kit. Couldnt get a tape measure at the top of the tire to measure but its close. I believe we lost almost 2 inches after the lowering kit so maybe 5 3/4 inches before the lowering kit?

 

[mmmmtorque]

I got 3 1/4" from the peak (middle) of (a new Pirelli) to the outer lip of the fender.

Its 3 3/4 " from the outside tread edge of the tire to the lip of the fender.

Its 6 3/8" from the middle of a new Pirelli to the lowest point inside the rear fender well.

 

[Nowwhat]

perfect thanks guys.....:rock:

 

[ViperTruck2933]

Mines not here to measure but mine seems to sit lower than everyone else's for some reason. :dontknow:

Prolly because of the professional who installed it (me, lol).

 

[Dave T(BADVENM)]

Mines not here to measure but mine seems to sit lower than everyone else's for some reason. :dontknow:

Prolly because of the professional who installed it (me, lol).

I think Joe and I compared yours to mine after he did my install. You were 1/4-1/2 lower then me in the rear...possibly because my truck had not settled yet.

Do you know if they got the genI Viper started yet?

I was tempted to swap your tires and wheels with mine but figured you'd notice the lack of tread on mine rather quickly

 

[silversrt]

Mines not here to measure but mine seems to sit lower than everyone else's for some reason. :dontknow:

Prolly because of the professional who installed it (me, lol).

I know the secret.Have a fatass like myself stand on the open tailgate before you tighten the leaf springs.

 

[mauiSRT/10]

3 inches middle of stock tires with 10k miles to fender rim.

Outside edge of tire to fender.....an inch or so lower.

NOTE: non professional install!!!

patrick

 

[Venom Power]

Mines not here to measure but mine seems to sit lower than everyone else's for some reason. :dontknow:

Prolly because of the professional who installed it (me, lol).

All this time I thought you had more like a 2"-3" drop...:dontknow:

 

[ViperTruck2933]

All this time I thought you had more like a 2"-3" drop...:dontknow:

Nope. Standard lowering kit. :rock: