Lowering Kit

[Wifey]

Looks nice and level . New bump stops look better than cut offs also

I see the blocks but what/where are the bump stops?

I thought i knew what they looked like but maybe not

Some red circles or an arrow would help! Lol lol

 

[CWPED]

First 2 are pix of the "New" look and the 3rd is a "before" look. Now over to get an alignment

 

[CWPED]

I see the blocks but what/where are the bump stops?

I thought i knew what they looked like but maybe not

Some red circles or an arrow would help! Lol lol

If you look closely you can see where we cut the rear block with a sawsall. It is a block made out of a plastic or fiberglass material. Easy to cut.

The one on the front was chiseled off the frame at the rivets and a new aftermarket piece was bolted in place. It is black and small. Looks like a hockey puck.

 

[Wifey]

If you look closely you can see where we cut the rear block with a sawsall. It is a block made out of a plastic or fiberglass material. Easy to cut.

The one on the front was chiseled off the frame at the rivets and a new aftermarket piece was bolted in place. It is black and small. Looks like a hockey puck.

I see it now! The block was easy the puck I had more trouble with!

Thanks!

 

[Wifey]

First 2 are pix of the "New" look and the 3rd is a "before" look. Now over to get an alignment

Wow that really did make a big difference!! Looks very nice- well done

 

[VIPR PWR]

First 2 are pix of the "New" look and the 3rd is a "before" look. Now over to get an alignment

Nice stance and doesnt appear radical .. have you given it a good run yet ?

 

[VIPR PWR]

If you look closely you can see where we cut the rear block with a sawsall. It is a block made out of a plastic or fiberglass material. Easy to cut.

The one on the front was chiseled off the frame at the rivets and a new aftermarket piece was bolted in place. It is black and small. Looks like a hockey puck.

Hahaha you pucked it

 

[VIPR PWR]

So what is the measurement from ground to fender hetween front and rear ?

 

[CWPED]

Nice stance and doesnt appear radical .. have you given it a good run yet ?

Have not. I stuffed it back in the garage. I want to get aligned and won't be able to do that until next week.

Looking forward to driving a bit and see if anything is noticebly different.

But I do like the new look. It sets "just right". Kind of changes the appearance to take on a look of something different rather than another 1/2 ton Dodge short box pickup with chrome wheels.

 

[Wifey]

Hahahaha! Chrome wheels and a wing!


If mine ever sees a mod that would be one i would consider!

 

[Wifey]

my concern is with clearance - changing tires and towing

 

[VIPR PWR]

my concern is with clearance - changing tires and towing

SC's are not meant for towing .. neither are manual transmissions

 

[Wifey]

Aluminum wheels and a wing actually lol

 

[Wifey]

SC's are not meant for towmg ..

I mean if it had to be towed!

 

[VIPR PWR]

They will rust hahahaha

 

[Wifey]

I have roadside service but not sure i would trust them - i have the angle written down in my file and it's not much - even a steep driveway approacg is iffy

 

[VIPR PWR]

I mean if it had to be towed!

Flat bed

 

[Wifey]

They will rust hahahaha

Chrome yes aluminum Not with NEVR DULL! Hahahaha

 

[Wifey]

Flat bed

How do we get it up there? The ramp angle

 

[Wifey]

I've seen them on trailers in the media section