Magnaflow Busted

JeffBoyette

Full Access Member
Joined
Feb 21, 2008
Messages
2,644
Reaction score
0
Location
Waldorf, MD
Always ride with the back glass open and the radio off. I like to listen to it. Sitting at a light i heard the dreaded rattle. Sounded like a heat shield. Pulled over at a gas station and bumped the muffler with the palm of man hand, and its rattling inside. :argh:
 
I emailed magnaflow customer support to see if they can sell me or give me a part number for the seperate muffler only without the tail section to swap it out. If i can get this for 100-200 it would be better than dropping 600 on a full system. The one I have is the second generation, and there is no rust. So all i need is a new can.

But i would never buy or suggest someone to buy the magnaflow system. Google it, youtube it, hell enter it into the VTCOA search bar.

.
 
Yep, same thing the one came with my truck did.
Good luck with that reply from Magnablow. I never heard back from them.
 
bro mine did the same thing, same problems you said.

thats why I went with spintechs, fully welded up, thicker steel than flowmaster and other companies use.

come check my truck out one weekend and listen to it. I posted that sound clip also.
 
i have the same here with my fkn Magnablow , this is the most crappy exhaust u can buy...:mad:
one of these days i'm gonna install my new Belanger headers , along with the original catback , only 10K miles on it...

for me , never that bull**** Magnablow on my vehicles !
 
Basically Magnaflow blew me off, they wanted the whole system shipped so they could determine what was wrong. I cut that $hit off and put two Cherry Bomb Vortex on there. F%^K MAGNAFLOW!

http://www.vtcoa.com/forums/f7/how-many-you-have-quality-issue-your-magnaflow-system-46023/

Hey i have exchanged 6 emails with Magnaflow over this deal. I give a list of direct questions i needed answered to get the problem solved and they answer ONE each response in a round about way. Its like pulling teeth. They really come off as ignorant. Putting together all the different responses i gathered.

1.) I needed the orignal purchase receipt which i dont have
2.) I needed to have a magnaflow dealer sendentire system not just the muffler
which I would have to pay for the labor until its proven defective.
3.) They will inspect it and if proven defective workmanship, ship another
Turn around 6-7 weeks
4.) Only then would they refund the labor spent on removing the bad product
5.) In the meantime i could buy a new system, and if they determine the system is bad, they will give me a magnaflow credit. A MAGNAFLOW CREDIT.

The mandrel bent pipe is mandrel pipe. It is rust free. i dont see why i junk the whole system and buy a new catback. I found some Borla XR-1 Race mufflers that are the same length so i wont have a pieced together system. And i will cut the tips off and weld in some borla intercooled tips.

I will never buy another magnaflow product, or a vehicle that already has it.
 
Last edited:
Yup, same unreasonable run around I got. I will never buy their crap again.

Hey i have exchanged 6 emails with Magnaflow over this deal. I give a list of direct questions i needed answered to get the problem solved and they answer ONE each response in a round about way. Its like pulling teeth. They really come off as ignorant. Putting together all the different responses i gathered.

1.) I needed the orignal purchase receipt which i dont have
2.) I needed to have a magnaflow dealer sendentire system not just the muffler
which I would have to pay for the labor until its proven defective.
3.) They will inspect it and if proven defective workmanship, ship another
Turn around 6-7 weeks
4.) Only then would they refund the labor spent on removing the bad product
5.) In the meantime i could buy a new system, and if they determine the system is bad, they will give me a magnaflow credit. A MAGNAFLOW CREDIT.

The mandrel bent pipe is mandrel pipe. It is rust free. i dont see why i junk the whole system and buy a new catback. I found some Borla XR-1 Race mufflers that are the same length so i wont have a pieced together system. And i will cut the tips off and weld in some borla intercooled tips.

I will never buy another magnaflow product, or a vehicle that already has it.
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top