Mopar CAI ?
- Thread starter FastRam
- Start date
MikeNice said:Also take your time installing the air duct to the hood. A huge PIA.It does not fit well. may have to do a little modification.
Love the look of the CAI :rock: but the air duct sucks.
IMO
What sort of modification may have to be done?
i'll look back in the catalogue againDa1Chief said:
FastRam, Try this # JU-P4510921FastRam said:
I found this site if you want to check it out.FastRam said:
http://www.theviperstore.com/RAM-SRT10_Products_Performance_Air_Intake.htm
JRSVIPR said:
Yep saw that. I found this at $679 for both CAI and duct work.
http://www.monicattichrysler.com/comersus/store/comersus_viewItem.asp?idProduct=1620
FastRam said:
$679
I'd go with JMBFastRam said:
$679!!!!??...lawdy mercy.....:vollkommenauf:
Anybody know where to get the rubber hose that hooks the CAI to the throttle body. Is it part of the Mopar kit or do you use the OEM? My truck had the Mopar kit and the previous owner poked holes in it for NO2 nozzles. When I put Stinkers new coils on I'll have the intake off so I'm going to drill holes for the nozzles in the intake, so i'll need a new hose.
yellowfever#154
Full Access Member
spydertt said:
Plug the nipple on the intake. Then get in touch with JMB Performance and get his breather setup.
http://jmbperformance.com/store/product_info.php?cPath=66_113_85&products_id=106
EDIT: Nevermind I reread what you said and I thought you were talking about something else.
Last edited:
the duct work is supposed to be the same, but that $679 price? man I can even get close to it, that seriously is very close to dodge cost evidently, best I can do is around the $758 markFastRam said:
they have a bunch of them in millwaukee, so it wouldnt take long to getspydertt said:
Takes a 4.5"....
http://intakehoses.com/Merchant2/merchant.mvc?Screen=CTGY&Store_Code=I&Category_Code=IHY
..
The Mopar cold air kit is only sold with the air duct for the hood. Also $679 is really cheap for the Mopar kit.
As far as the replacement rubber boot between the intake tube and throttle body you can try to call the Mopar Performance hot line and see if they can get you one. I was told that if you have a receipt they can try to get you one from the manufacture of the kit. The direct # is (888)528-4364
As far as the replacement rubber boot between the intake tube and throttle body you can try to call the Mopar Performance hot line and see if they can get you one. I was told that if you have a receipt they can try to get you one from the manufacture of the kit. The direct # is (888)528-4364
JTS VENOM PERFORMANCE said:the duct work is supposed to be the same, but that $679 price? man I can even get close to it, that seriously is very close to dodge cost evidently, best I can do is around the $758 mark
Tony, if the Duct Work is the same would this work p4510920 ????? It says it is for the Hemi 5.7L....
That would give him the CAI w/o the Ram Air Hood Scoop assy.... That is what he is looking for....
Priced at $204 here is the link
The kit for the 5.7l Hemi will not work on the SRT-10. The throttle body is an oval shape while the Hemi has a round throttle body.
raceram9
Full Access Member
not to metion yalls is in the front of the engine the 02-08 HEMIS are toward the back of engine and the 09 and up faces up but in the frontdragon said:
SC_Daytona
New Member
- Joined
- Jun 25, 2010
- Messages
- 2
- Reaction score
- 0
According to the 09 Mopar catalog P4510921AB fits the 10. The ram air tube can also be ordered seperately with part number P5153307 and the CAI seperately with P4510921.
Support Us
Become A Supporting Member Today!
