Need Caliper

[WILDMAN]

My drivers side front caliper started sticking today causing it to get extremely hot. Anyone got one for sale or should I try to rebuild it myself.

Wade
423-539-0527

 

[ZCx]

no more than there is to them, i would suggest DIY.

probably just needs a good cleanin

 

[Arska2]

Reworking is not really tricky !
Just unscrew the caliper, push the break pedal
until the pistons come out and you will
find rust on the inside of the calipers.
Just take it off with sandpaper, control the o-rings,
put the pistons back in and you should be fine.

Dont forget, this was just a short description.
Look for a real "how to" on this forum or google.

Good luck

Arne

 

[WILDMAN]

Wildman

Just went to Advance and got a caliper for $49.00. I am going to just replace it. Thanks for the reply....

Wade

 

[ZCx]

Just went to Advance and got a caliper for $49.00. I am going to just replace it. Thanks for the reply....

Wade

or ya could go to Advance & get a rebuilt one, lol:rock:

be sure to flush the whole system real good:rock:

 

[VIPR PWR]

Be prepared for the other side to do the samething....

 

[TheMoparConnection]

i wouldnt trust autozone or advance calipers. They rebuild kit through dodge is only 50.00 or so