nitrous shot

[Rice Eater]

I and a couple others have the Cold Fusion Viper kit. 100-400 shot dual nozzles.
The kit is good, customer service is not good.

I think there are a few with the ZEX kit but I couldn't talk to it.

The hardest part of the install was the wide open throttle switch mounted to the throttle link housing. At least that is where I mounted it. I will take pics and post later. Also, mounted a purge kit.

I have some cold NGK iridiums sitting next to me now. Part number BKR7EIX, stock number 6988. However, noone that I know of, has used these plugs. So it looks like I am the test bed and you may want to wait to see if they work. I believe they will or I wouldn't have bought them. Art has them in stock.

I do have MSD wires installed right now (see pic).

i see your pic of the install and I like the red protective hose things looks sweet. My question is this...are all kits for our trucks that complex? Is there a kite that has less parts and still does the job?

 

[Rice Eater]

Pay attention guys, Daniel has an excelent record with Nitrous and he is a good tuner.

A seperate fuel needs to be stand alone, and consist of;

Source of fuel. ( Seperate fuel pickup out of the tank or seperate tank, Jaz makes a neat little 1 gallon tank)

Seperate, independant pump

Seperate, independant lines

That way you can use a good high octane fuel in the seperate tank and don't need to wory about lean out and/or detonation.

Do not piggyback any of the stock fuel system.

Fast Jack...you are the man thanks for the advice!!! I'm going to contact you when I go to order my stuff and run the list by you to see what you think if thats ok!?:rock:

 

[FSTJACK]

Fast Jack...you are the man thanks for the advice!!! I'm going to contact you when I go to order my stuff and run the list by you to see what you think if thats ok!?:rock:

If I can be of help to anyone I am more that happy to do so..

Daniel has proven his ability with NoS, he has helped a lot of the guys out. I have talked to him myself and he is a really quality guy

Zex-srt10 also has run a lot of nitrous through his motor.

 

[Bone]

i see your pic of the install and I like the red protective hose things looks sweet. My question is this...are all kits for our trucks that complex? Is there a kite that has less parts and still does the job?

It's two soleniods (fuel and Nos), and a purge solenoid with twin tubes. It's about as clean as I can get it.