Nitrous with a supercharger

[cyalata]

thats a good question i'll get back to you on that lol....my trucks in austin getting the motor installed but .. i'm tring to check now but i think the plate is real thin should add much to worry about

here is the whole kit

my truck will be the first to have it on the SRt-10 ram but thers a few vipers with them with no problems

so should get one of these kits or jus hold off until i can get justin to desgin one for me:dontknow:

 

[Tooloe]

that my friend is up to you... i like justins work.. but i'm fond of plate kits cause i like to be able to pop the hood and not be able to see any thing to do with nitrous on the truck.. but i know dave "NitroDave" would not make anything that didn't work he has been nitrous on LS Motors for years and years and the past 4 or 5 hes been dealing with vipers more and more.. i'm buying his kit and will be spraying around a 300 shot threw it

 

[cyalata]

that my friend is up to you... i like justins work.. but i'm fond of plate kits cause i like to be able to pop the hood and not be able to see any thing to do with nitrous on the truck.. but i know dave "NitroDave" would not make anything that didn't work he has been nitrous on LS Motors for years and years and the past 4 or 5 hes been dealing with vipers more and more.. i'm buying his kit and will be spraying around a 300 shot threw it

aight ill still give em a ring tom. im jus wandering if the plate will match to the roe/tb and if my linkages will be long enough i dont wanna have to replace to much shit lol but i do want nitrous for sure i do like the direct port option but the roe kinda screws ya when it comes to that

 

[Tooloe]

my TB is a Roe

 

[cyalata]

my TB is a Roe

then maybe this systm will work on the truck:marchmellow:

 

[099 FEVER]

I used a Helix Power Tower Spacer it's 1" thick. Machine matched it to the Roe Throttle Body. Works great. I turned the throttle and cruise cable bracket upside down to allow for the extra distance. Also added a WOT switch to the assembly.

 

[Tooloe]

Ya know since were talking about nitrous... i've never been a big fan of a WOT switch i've always used a RPM Window Switch or a Progressive controller
never thought the WOT switch was real safe

 

[tinygiants]

Ya know since were talking about nitrous... i've never been a big fan of a WOT switch i've always used a RPM Window Switch or a Progressive controller
never thought the WOT switch was real safe

You need both from my understanding. You do not want the nitrous to come on unless you are at a safe fuel mix. That is best controlled when in the closed loop (or is it open, any ay it is WOT).

 

[FATJACK]

The better window switches include WOT provisions.

 

[bigike]

PLUMB IT INTO THE BACK OF YOUR ROE!

IN THE REAR PLATE WHERE THE BYPASS IS.

A TRUCK RAN 10.7 WITH THAT SETUP

 

[Tooloe]

there are so many options that is just crazy and really just need to take some time and ask some questions and look at other peoples set ups lol

 

[Yellow venom]

I used a Helix Power Tower Spacer it's 1" thick. Machine matched it to the Roe Throttle Body. Works great. I turned the throttle and cruise cable bracket upside down to allow for the extra distance. Also added a WOT switch to the assembly.

View attachment 33498

View attachment 33499

Now thats some serious NOS!!:burnout: :burnout: :burnout: Looks killer!