Rickspeed
Full Access Member
I bought a used set of Mopar Long Tube Headers, and did not get the extenders for the Front o2 sensors, anyone know where i can buy some? I need 2 for the front o2 sensors. I have elec sims in the rear 2.
o2 wire extenders
- Thread starter Rickspeed
- Start date
Rickspeed
Full Access Member
hashash said:
I pm'ed them both, waiting to hear back, i guess on the 05 ram you need them for the front o2 sensors, you said you used them for the rear ones, right?
perk_1405
Full Access Member
i would contact mopar, the place where they came from.
tried to contact the performance hotline but they were no help. i will keep looking.
TheMoparConnection
Full Access Member
- Joined
- Jun 9, 2006
- Messages
- 3,978
- Reaction score
- 3
yeah I called the mopar hotline too... not available seperately. AEM is the manufacturer of these headers but I've tried to get parts for other stuff they make for mopar and they wont sell it. It looks as if you must make your own.
perk_1405
Full Access Member
TheMoparConnection said:
it shouldnt be to hard only like three wires. just make sure to use the heat shrink connectors.
Rickspeed
Full Access Member
Thanks everyone, bought some new Bosch oem ones tonight at autozone, gunna cut splice and make some longer connectors tomorrow.
Has anyone tried Roe Racing?
He put on my Mopar Long Tube Headers and probably would have the extenders.
He put on my Mopar Long Tube Headers and probably would have the extenders.
attila
Full Access Member
looks like I need 'em too!
where did you finally get? how do they look like?
I'll probably cut the stock cables and solder an extension...
where did you finally get? how do they look like?
I'll probably cut the stock cables and solder an extension...
Rickspeed
Full Access Member
attila said:
I went to autozone, and bought 2 new front ones for under $60, cut the wires off the old ones and soildered them to new ones which doubled the lenth of each, which was more than enough, and still had oem harness that plugged right in. Hope that helps.
HOT RAM
Full Access Member
Two OEM O2 sensors for $60 ?/ Each or for the pair ? :dontknow: 
carp you mean they wont fit the stock one's on the mopar long tubes ? dammit
HOT RAM
Full Access Member
Is code P0031 the left or right O2 sensor ? Pretty sure it is rear,but don't know which side ?
Good to know,I gotta do the same then!
ok - i guess i have a problem, bc i made the extenders on the O2's i got the driver side in but... the pass side i cant reach the connector my headers are installed and i really dont want to remove them to put in the sensor
any ideas ????
any ideas ????
Not sure about the '05, but on my '04 I have both rear sensors strapped to the frame, with both bungs capped and mine has never had a code. Worth a try...
VIPER said:ok - i guess i have a problem, bc i made the extenders on the O2's i got the driver side in but... the pass side i cant reach the connector my headers are installed and i really dont want to remove them to put in the sensor
any ideas ????
Without seeing it, sorry to say, break out the tools...???:dontknow:
Support Us
Become A Supporting Member Today!
