Outnumbered's RAM SRT-10

Status
Not open for further replies.

JTS VENOM PERFORMANCE

Active Member
Preferred Vendor
Joined
May 19, 2006
Messages
33,544
Reaction score
2
Location
SRT10 heaven
OUTNUMBEREDS 05 QC



Outnumbereds quad cab should be a sweet street ride with tons of hp to boot

list of mods
Ported intake
ported heads
jtsvp cam
push rods
underdrive pulley
jtsvp throttle body
jtsvp wires an coils
billy boat headers with custom exhaust
jtsvp lowering kit
suncoast convertor
jtsvp built transmission
jtshydro graphics
jtsvp hood
air bag helper kit

END RESULT 586 RWHP

testimony

I finally picked up the truck last night. In short ( because I could go on and on), the truck is just unreal. First the sound, it is absolutely incredible. I stopped at the gas station last night and within the first minute I had two guys come over and ask what motor was in the truck. Then at one of the stoplights I could tell there was an SUV behind me intentionally trying to listen to the exhaust. He then came up beside me and asked me to roll down my window and wanted to know what motor I had in the truck; how much horsepower I was making and what type of cam I was using. The video sound clips that Tony has floating around does not do this truck justice when you hear it in person. At idle the truck shakes because it is loping so hard. It makes me smile just thinking about it. Also the pictures of the motor don't do this truck justice. I popped the hood for the two guys at the gas station to view and both of their jaws just dropped. It is absolutely stunning. I could talk for days on the sound and on the appearance but I did say that this would be in short.

Power wise........ Damn! As some of you know I had a Harley Davidson truck back in 2002 that made 627 hp to the rear wheels. It was a very strong truck but it did not pull anywhere close to what this truck does in second and third gear. At the top of Secane gear it is almost like I have a shot of nitrous it pulls so hard. I am having to relearn where I can go full throttle and where I need to be a little more cautious, Because it can be a handfulvery quickly.

Okay the barber just showed up at the barber shop so I have to go. I may give some more details later. Tony you built a heckuva truck. I just don't think I could be any happier.
Also, the air bag kit that Tony installed works fantastic with Tony's lowering kit. As low as the truck is, whenever I had passengers or heavy luggage in the back, the truck would sit lower in the back than I wanted. But with the bags, I can adjust the height with a wireless remote. ....sweet!
 

Attachments

  • 001.jpg
    001.jpg
    371.6 KB · Views: 113
A few of Rons specs


We obviously have a heads cam package that works

the trans was built by us, with a custom suncoast valve body
raybestos clutchs, billet servos, Kolen steels, extra springs, clutchs
we now work with Ron at suncoast
for the SRT's ,so it also has a custom suncoast 2500 stall convertor
nothing special jsut some beefing up of the interals, with some
areas drilled for extra lubrication. Ron is the test bed on the new trans
to see how it will act and live.
end result is positive shifts, but very easy on daily driving

the cam is nothing special 540/544 323/236 on a 113 lc
decent idle , decent power, heads are basic ported heads, 202/160 valves
psi springs on custom mounts for the oem rockers, hardened push rods, bump in compression to about 10.5 to 1 , some porting on the intake,
we are tweakig to a 2.100 vavle to put him well over 600rwhp easily
not anything special , jsut years of experience thru hotrodding.
the heads cam package installed will be in the 7k area with tuning
prices depends on options as everyone has different ideas, all the cams will
also be different as everyone wants different drivability. We cater to each persons needs, not throwing out a generic specification

He will be hitting the track soon, as we plan to install the new jtsvp coil overs with a custom traction set up

other than that he got some hydro imaging under the hood, billy boat headers, 200 cell covnertors, custom exhasust with magnaflows
extreme lowering kit, remote air bag kit, new oem bed cover, bedrug
custom lighting, lighted push button,
it also has an oem radio, power seats, power windows, loyyds mats with a red logo, oem rims venom hood, with a decal underneath in red
we had peperonni mushroom pizza the day he picked it up, with a few beverages and then later in the day had sushi
we are swapping to muslim religion and changing my name to suqa madiqu:reddy:
so if your interested in the package or bringing yours down , call us for more info , there are tons of options, at the moment we are booked up well into fall with heads cam builds, so we will need to schedule you in.

and thanks Ron for all the help and letting us swap heads and cams over and over to get the right package, I am sure you are enjoying the new found second gear sir:burnout:
 
Note:

If you would like to discuss the pro/cons of a particular build compared to other builds, please feel free to do that in the off topic area and not in a vendors forum

Thank You

fknVj
 
Status
Not open for further replies.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top