Pcv elbow

[Silver05]

Guys the elbow piece that goes under the intake to the driver side valve has a crack in it, does anyone have one I can buy so I can replace it ? https://imgur.com/a/DXNxN4h

 

[rottenronnie]

No PCV valves in these engines.

It looks like a short section of hose split, easy fix.

 

[Silver05]

With 3/4 heater hose ?

 

[rottenronnie]

Sure, if a short piece of 3/4" hose fits, it will work fine.
It will likely be tougher than what you are removing.

 

[Silver05]

I have a piece of what I made my oil cooler lines out of , I just didn’t want it collapsing with the engine heat

 

[rottenronnie]

I have a piece of what I made my oil cooler lines out of , I just didn’t want it collapsing with the engine heat

Only a very wimpy hose could cause you concerns.
A stock Gen III produces 12" Hg of vacuum and just about anything above a (new) Condom with a hole in it should suffice!