Progress on the Turbo Plumbing.

Persicutor said:
so whats the max rpm your going to rev it to? oh, and what type of clutch and tranny are you going to use? what about the exhaust, im guessing its just a straight 4" pipe after the turbo's, nothing else.
ps: i heard that you were a top fuel dragster mechanic or somthing:dontknow:

Max RPM will be about 7400,
Trans is a [Mikes Ultimate Vasco TH400] with a Neal Chance Pro Mod bolt together converter
Exhaust is a 4" straight pipe. I have some race mufflers that will be set uu with V-Band clamps so it can see some street duty.
I am a crew member on a nostalgia top fuel funny car. Me lucky............:D
 
awesome:rock: oh ya, what kind of engine management are you using? Motec?
and whens it going to be ready? can't wait to see some vids of this thing
 
Persicutor said:
awesome:rock: oh ya, what kind of engine management are you using? Motec?
and whens it going to be ready? can't wait to see some vids of this thing


by the time this thing is running there won't be vids anymore you will get a direct feed to the microchip implanted in your temporal lobe...or you can watch it via the screen in your flying car....:D
 
Persicutor said:
awesome:rock: oh ya, what kind of engine management are you using? Motec?
and whens it going to be ready? can't wait to see some vids of this thing

It is going to have a Motec M800.

I would like to see it run, to be able to shoot some video. I have been working on it since September of 2004. That is when the engine was pulled, and we started work.

Quote:
Originally Posted by Nowwhat
by the time this thing is running there won't be vids anymore you will get a direct feed to the microchip implanted in your temporal lobe...or you can watch it via the screen in your flying car....:D



Why do you find it necessary to bag, on a poor, old, overweight, simple minded, gray haired, chronicly sick, pathetic, friendless, lonely, loveless, senior citizen, that is just doing his best to build a simple truck.
My plans and dreams are quite ordinary.
Take a perfectly good factory hotrod truck and make it a little faster and quicker.
Just as you have acomplished with the SuperTank.
Oh poor me..................

What is a microchip ?

Do you really have a flying car ?

Is the temporal lobe a part of the time space continum ?
 
FSTJACK said:
It is going to have a Motec M800.

I would like to see it run, to be able to shoot some video. I have been working on it since September of 2004. That is when the engine was pulled, and we started work.

Quote:
Originally Posted by Nowwhat
by the time this thing is running there won't be vids anymore you will get a direct feed to the microchip implanted in your temporal lobe...or you can watch it via the screen in your flying car....:D



Why do you find it necessary to bag, on a poor, old, overweight, simple minded, gray haired, chronicly sick, pathetic, friendless, lonely, loveless, senior citizen, that is just doing his best to build a simple truck.
My plans and dreams are quite ordinary.
Take a perfectly good factory hotrod truck and make it a little faster and quicker.
Just as you have acomplished with the SuperTank.
Oh poor me..................

What is a microchip ?

Do you really have a flying car ?

Is the temporal lobe a part of the time space continum ?

I have to disagree with at least the "Friendless" part above.;) :p :D :rock:
 
More pics

Trailered the truck from Richard's today. It is mostly finished there and all the plumbing is done, with the exception of the O2 sensor bungs. It is all stainless and I thought Richard ordered them and he thought I ordered them. I will clock them and we can weld in the bungs later before coating and polishing.
 

Attachments

  • DSCN0862.JPG
    DSCN0862.JPG
    1 MB · Views: 41
  • DSCN0856.JPG
    DSCN0856.JPG
    1.3 MB · Views: 52
  • DSCN0860.JPG
    DSCN0860.JPG
    1.3 MB · Views: 45
  • DSCN0858.JPG
    DSCN0858.JPG
    1.2 MB · Views: 45
More pics

More pics;

The exhaust pipes that run under the doors to the front of the rear tire, come off and get replaced by short 4" turn outs for the track.
 

Attachments

  • DSCN0850.JPG
    DSCN0850.JPG
    1.2 MB · Views: 45
  • DSCN0849.JPG
    DSCN0849.JPG
    1.2 MB · Views: 31
  • DSCN0844.JPG
    DSCN0844.JPG
    1.3 MB · Views: 37
  • DSCN0843.JPG
    DSCN0843.JPG
    1.3 MB · Views: 31
More pics +

More;
 

Attachments

  • DSCN0842.JPG
    DSCN0842.JPG
    1.3 MB · Views: 32
  • DSCN0836.JPG
    DSCN0836.JPG
    1.2 MB · Views: 31
  • DSCN0834.JPG
    DSCN0834.JPG
    1.3 MB · Views: 32
  • DSCN0833.JPG
    DSCN0833.JPG
    1.2 MB · Views: 45
So I'm very sorry to have to inform you... but they stole your wing while they we're working on it this whole time:dontknow: :eek:
 
Last of more pics

I can't up load more than 4 pics at a time;
 

Attachments

  • DSCN0830.JPG
    DSCN0830.JPG
    1.2 MB · Views: 31
  • DSCN0828.JPG
    DSCN0828.JPG
    1.3 MB · Views: 28
  • DSCN0823.JPG
    DSCN0823.JPG
    1.2 MB · Views: 65
  • DSCN0854.JPG
    DSCN0854.JPG
    910 KB · Views: 42
so whats the specs? bov? wastegate? turbo? estimated hp? we need details :D :D
 
FSTJACK said:
I can't up load more than 4 pics at a time;
If that exhaust is through the bumper.....way coool! :rock: The whole system/install is an unbelievable piece of engineering!( Is this the first flying car Nowwhat is talking about?):p
 
Last edited:
It is looking very good Jack, that should really haul the mail when its done.:rock:

Bill.
 
Thost pics stimulate blood flow! Who needs viagra!!! :rock:

Props man, props.
 
joemags54 said:
If that exhaust is through the bumper.....way coool! :rock: The whole system/install is an unbelievable piece of engineering!( Is this the first flying car Nowwhat is talking about?):p
If thats the exhaust, its going through the front bumper. I think its a ram air intake.:dontknow:
 

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Back
Top