Re-did my Paxton Auxiliary Pumps fuel lines...

[jrgnd]

I sprung a leak and ended up replacing the rubber hoses and relocating the pumps. Here are some before and after pics.

My buddy owns a garage and he did all the work from home. Really good work.:rock: This is his website: www.thehemigarage.com

 

[JTS VENOM PERFORMANCE]

killer job!

looks awesome!

 

[b exxon]

Wow that looks great . I am gonna ask Gary to do mine like that. If not I will do it when I get it back. It looks so much better.

 

[Brat]

looking good.

 

[FlyingLow]

What kind of oil filter are you using?

 

[Nowwhat]

holy crap....the before pics are the crapiest work I have ever seen....

Gary....send $$ to Jrgnd for what he had to spend to do the job right and for endangering his life....

You got to stop going to those Hennessey workshops.....

 

[jrgnd]

killer job!

looks awesome!

Thanks bud.....

 

[jrgnd]

Wow that looks great . I am gonna ask Gary to do mine like that. If not I will do it when I get it back. It looks so much better.

Thanks.....The hoses are rated at 1000 PSI....Should be able to support future mods....

 

[jrgnd]

looking good.

Thanks....

 

[jrgnd]

What kind of oil filter are you using?

I am using X-Metal oil filter.....

 

[jrgnd]

holy crap....the before pics are the crapiest work I have ever seen....

Gary....send $$ to Jrgnd for what he had to spend to do the job right and for endangering his life....

You got to stop going to those Hennessey workshops.....

No comments.....

 

[Nowwhat]

No comments.....

dude...I am not trying to be disrespectful to you or your truck....but wow.........the cost to do the job right was included in what you paid......we aren't talking about a heater hose here.....

 

[jrgnd]

dude...I am not trying to be disrespectful to you or your truck....but wow.........the cost to do the job right was included in what you paid......we aren't talking about a heater hose here.....

No disrespect perceived. I am just not making any comments.:burnout:

 

[JTS VENOM PERFORMANCE]

I do understand why you had leaks....reg hose clamps will def not work with fuel injection!

60psi and a screwdriver equals fuel leak divided by the multiple of 6 and you get fire then multiply by 12 and that means dangerously dangerous

 

[jrgnd]

I do understand why you had leaks....reg hose clamps will def not work with fuel injection!

60psi and a screwdriver equals fuel leak divided by the multiple of 6 and you get fire then multiply by 12 and that means dangerously dangerous

I agree...shouldn't get any leaks now....

 

[Dominick572]

I do understand why you had leaks....reg hose clamps will def not work with fuel injection!

60psi and a screwdriver equals fuel leak divided by the multiple of 6 and you get fire then multiply by 12 and that means dangerously dangerous

Actually those are Metal Crimp rings you need the special crimp tool to pipe the system. The stuff used for plumbing is made by Watts, personally I do not use it because overtime it will leak. Same exact stuff though.

The repipe I trust the new flare style system much more, you wont have to worry about leaks again.

 

[Nowwhat]

I do understand why you had leaks....reg hose clamps will def not work with fuel injection!

60psi and a screwdriver equals fuel leak divided by the multiple of 6 and you get fire then multiply by 12 and that means dangerously dangerous

not to mention the hoses look like they were cut to size with a dull steak knife

 

[JTS VENOM PERFORMANCE]

Actually those are Metal Crimp rings you need the special crimp tool to pipe the system. The stuff used for plumbing is made by Watts, personally I do not use it because overtime it will leak. Same exact stuff though.

The repipe I trust the new flare style system much more, you wont have to worry about leaks again.

yep! got that tool,but unless the line is flared correctly and crimped correctly the will leak
gary's my bud and all,but I would have def used an fittings on fuel lines
but that's just me

 

[Dominick572]

yep! got that tool,but unless the line is flared correctly and crimped correctly the will leak
gary's my bud and all,but I would have def used an fittings on fuel lines
but that's just me

Your system on your truck is just a tad bigger than that setup though lol....

 

[JTS VENOM PERFORMANCE]

Your system on your truck is just a tad bigger than that setup though lol....

this is true ....but....I also am only runnin 50psi thru 3/4 line and he is pushing 60psi + thru 3/8 line