Hellcat Hauler
Active Member
- Joined
- Oct 6, 2023
- Messages
- 78
- Reaction score
- 206
Custom built, PITA lol.
I built this for a little more viper vibe and trying to disguise my hitch a little.
I bought the viper diffuser fins off ebay, they are stainless steel and come powdercoated textured black. I originally bought a 3'x2' 3/16" black plastic sheet , measured and cut it out. It was too flimsy when I bolted the fins on. So I bought a 3'x2' sheet of ACM black composite. I tracked the pattern onto the acm and cut it out. Bolted the fins on and mounted to the truck. I used 1"x1/4" aluminum bar to make mounting brackets. Once I mounted it, I came to realize that the front was going to catch air. So I took the original template, had to heat it and bend it, and riveted it to the front of the ACM. I cut it to fit, made more brackets, and boom.
I built this for a little more viper vibe and trying to disguise my hitch a little.
I bought the viper diffuser fins off ebay, they are stainless steel and come powdercoated textured black. I originally bought a 3'x2' 3/16" black plastic sheet , measured and cut it out. It was too flimsy when I bolted the fins on. So I bought a 3'x2' sheet of ACM black composite. I tracked the pattern onto the acm and cut it out. Bolted the fins on and mounted to the truck. I used 1"x1/4" aluminum bar to make mounting brackets. Once I mounted it, I came to realize that the front was going to catch air. So I took the original template, had to heat it and bend it, and riveted it to the front of the ACM. I cut it to fit, made more brackets, and boom.