Rear wing removal?

[Wastelands Warrior]

Hey folks,

Just wondering how involved it is to remove the rear wing. I want to get mine repainted and since the truck is being stored for the winter I'd like an idea of what is needed to get the wing off so I give myself enough time to go get it.

Thx

WW

 

[trussman]

Sawsall works best IMHO.

 

[StinkyLinky]

two bolts on front edge from inside bed, then you slide it forward out of the rear posts.

 

[Wastelands Warrior]

Sawsall works best IMHO.

I know Jay Leno is retiring, but they already have a new Tonight Show host lined up that isn't you...lol

 

[trussman]

I know Jay Leno is retiring, but they already have a new Tonight Show host lined up that isn't you...lol

Who said I was kiddin.

 

[Wastelands Warrior]

two bolts on front edge from inside bed, then you slide it forward out of the rear posts.

Thx Bossman!

 

[trussman]

two bolts on front edge from inside bed, then you slide it forward out of the rear posts.

Good. Someone with real advice

 

[Wastelands Warrior]

Good. Someone with real advice

I'm not allowed to use sawzalls or power tools.

 

[VIPER]

use the tool kit that came with the truck - takes about 5 mins to remove - its easy

 

[trussman]

use the tool kit that came with the truck - takes about 5 mins to remove - its easy

So that's what that nut driver is for. My wing is bolted to my bed cover so it's never needed to be removed.

 

[VIPER]

So that's what that nut driver is for. My wing is bolted to my bed cover so it's never needed to be removed.

yep - thats what its for

 

[Wastelands Warrior]

use the tool kit that came with the truck - takes about 5 mins to remove - its easy

Ya'll r learnin' me good! Thx mucho!

 

[VENOMOUS1 RACING]

It's a 10mm bolt on each side or leading edge of wing (front edge) then you'll fist bump each side towards the rear of truck on the alignment pins. Gently remove once it comes loose. There is a bracket setup that allows you relocate to front of bed when not in use.
Install is reverse of above. :rock:

 

[VPRPWRD]

It's a 10mm bolt on each side or leading edge of wing (front edge) then you'll fist bump each side towards the rear of truck on the alignment pins. Gently remove once it comes loose. There is a bracket setup that allows you relocate to front of bed when not in use.
Install is reverse of above. :rock:

Get it, because he is from Jersey, like Jersey Shore.....never mind.....

 

[Wastelands Warrior]

Get it, because he is from Jersey, like Jersey Shore.....never mind.....

Yeah, I'm only used to working on Irocs! Dayum, that is an ol' skool Guido reference. I don't even know what modern Guidos drive...

 

[VPRPWRD]

Yeah, I'm only used to working on Irocs! Dayum, that is an ol' skool Guido reference. I don't even know what modern Guidos drive...

Caddys

 

[Wastelands Warrior]

Caddys

Ah. I do have a 92 Fleetwood rusting away in my back yard. So maybe I can be considered a White Trash Guido...

 

[Wastelands Warrior]

Thx for the help guys. Came off real easy..