Does anyone have the complete set of intructions for 04 s/c, I did not get them all. Waiting on reply from both sean and kyle but if anyone has them it will cut my wait time. Also the jig instructions please. Thanks Guys.:marchmellow: :marchmellow:
Yes thank You all Thank you Sean , and Thank You Kyle and Thanks Perk.kyle's srt10 said:Got ya taken care of
Oh without a doubt Sean has been great to work with along with so many others on this site. No I just want to make sure I had everything before I start. Just cleaning it and get ready to install tommorow. What size were the roll pins for pinning the crank?oldguysrt10 said:I installed mine in June. No doubt the instructions are required but you won't have any problems. Best of luck. You'll love the product, and Sean is great to do business with.
If you didn't buy replacement/upgraded sparkplug wires I suggest you do and take care of them while you have the intake off.
The most frustrating part of the installation for me was time versus real progress getting the coolers out of the way to drill the crank then back on afterwards.
The only somewhat special tool needed was 1/4" drive torx and extensions to get to the inner rear bolts on the intake.
Enjoy,
oldguy