Side exhaust part number

V

Viper7777

Full Access Member
Joined
May 24, 2006
Messages
310
Reaction score
0
Location
VA
Didnt somone once say they worked for a dealership? I need to find the part number for these sills. I thought i ask here frist before going to the dealership myself and have the 18 yr old kid looking for hours on end in the computer.

These are the side sill's im looking to use in running my side exhaust.
 

Attachments

  • corsa_0011_3.jpg
    corsa_0011_3.jpg
    102.4 KB · Views: 3,326
Wait this is a better pic, Im looking just for the plastic black peice .
 

Attachments

  • corsa_0011_3.jpg
    corsa_0011_3.jpg
    104.8 KB · Views: 853
eeck im not sure to be honest. I think these are the new side sills from 05-06 vipers.
 
i'm having a bit of trouble logging in to work to look up that P/N...I'll be out of the office tomorrow but will do on Thursday...please remind me as I get extremely busy and will forget.
 
That's a molded piece for a Viper sideskirt what makes you think it'll work on our rigs?? :dontknow:
 
Ok thanks bucke77


well according the manual at corsica that piece comes off, hence the screws there on the fender well. I just want the trim black plastic piece, thats all im looking for. OH I Quarentee i make it fit lol,, sledgehammer will fix anything.
 
that piece may come off but it may only be part of the sill panel???? I'll check for ya.
 
Wow cool thanks for the info ROK,

Im hopeing i can get just that one peice and its not sold all together on the viper above. That peice is exactly what i was looking for :confused: . If i cant then i may have to resort to the other gen 1 or 2 sills, if i can find a good deal on them. They are pricey. Or i might go with what you mentioned.

Are you going to do a curve around the frame ? or using a criss cross pattern. Like the left header for the right side, Right header for left side. Running that way you can put a small H-pipe in there, I even thought about C nocthing the frame just a small bit. Then boxing it all in of coarse, that would take the curve out of the bend if i go the over the frame route, so i wont get any hot spots in my exhaust.
 
Viper7777 said:
Wow cool thanks for the info ROK,

Im hopeing i can get just that one peice and its not sold all together on the viper above. That peice is exactly what i was looking for :confused: . If i cant then i may have to resort to the other gen 1 or 2 sills, if i can find a good deal on them. They are pricey. Or i might go with what you mentioned.

Are you going to do a curve around the frame ? or using a criss cross pattern. Like the left header for the right side, Right header for left side. Running that way you can put a small H-pipe in there, I even thought about C nocthing the frame just a small bit. Then boxing it all in of coarse, that would take the curve out of the bend if i go the over the frame route, so i wont get any hot spots in my exhaust.
Click to expand...
Not sure exactly.My guy has to get under there and see how the routing goes .I am only doing it on the one side similar to Donnie`s.I figure just move the Magnaflow up and cut some pipes to fit.
I`m doing some NACA ducts on the tops of the fender for more air flow too.
 
How many have you done this mod with side exhaust? Please post some pics. How did you route it? What did you do with the rear bumper cutout?
 
ive got them but didnt go through the body, thats my next mod...lol
 
That's a hot looking mod. I was also thinking about doing this, but didn't bother. I like how it looks though..
 
Does anyone have pics of a viper style exhaust on a qc..or rc? I think this would be a really neat feature to mimic the viper.
 
The link won't work because this is an old thread.. But I believe a couple trucks around here had this done. Doneo is one of them..
 
You must log in or register to reply here.

Latest posts

Support Us

Become A Supporting Member Today!

Click Here For Details

Random Media

5
VTR-0025 VIPER
dsc072129wa
040820102251
Back
Top