slave cylinder shim?

[kcjive]

Took my 04 to the dealership the other day to get my slave cylinder replaced. I have read before on here that alot of you suggest replacing it with the actual viper slave cylinder, so I asked the dealership to order it. Is it true that the only modification is using a .25 shim for the slave to make it work correctly? Thanks.

 

[Westxsrt10]

No shim need for the slave, the 1/4" shim goes between the engine bay firewall and master cyl ...you better get the matched Viper master cyl. and a new clutch while its torn apart.:smokin:

 

[RedSrt007]

1/4" on the slave, and 1/2-5/8 (depending on your liking) on the master @ firewall.

Do a search..TONS of info

-Red

 

[JTS VENOM PERFORMANCE]

1/4" on the slave, and 1/2-5/8 (depending on your liking) on the master @ firewall.

Do a search..TONS of info

-Red

Stone man is 100% correct me and him worked on mine by phone for freakin Days!!!!

/1/4 inch on the slave, and personal prefernce on the master cylinder

 

[moparracing]

talk to roe about getting just the shims...... they were perfect for my setup.......:rock:

 

[Westxsrt10]

1/4" on the slave, and 1/2-5/8 (depending on your liking) on the master @ firewall.

Do a search..TONS of info

-Red

Thats weird..i did the master/ slave upgrade and didn't use a shim on the slave and all's well??:dontknow:

 

[RedSrt007]

Stone man is 100% correct me and him worked on mine by phone for freakin Days!!!!

/1/4 inch on the slave, and personal prefernce on the master cylinder

Lol...I remember that...good times...good times...

 

[DC Performance]

You need to run the Viper slave and master, plus the shim kit. We stock these.

Dan Cragin
DC Perfomance Inc
310-841-6996